Brady B-1label_film_tape
Engraved Tags and Signs
Brady B-1 engraved tags and signs are a rigid laminate material designed for both indoor and outdoor use with a thickness of 0.062 inches (1.6 mm) and service temperature range from -40°C to 90°C.
Material Composition
rigid laminate
Adhesive System
Non-Adhesive
Operating Temperature
-40°C to 90°C (-40°F to 194°F)
Total Thickness
62 mils (1.6 mm)
Raised Push Button Plate
B-1 Application & Installation Blueprint
Raised Panel Push-Button Plate (Engraved Replacement) • Physical application tolerances and surface engineering
Industrial Fit Certified
Raised Panel Nameplate Installation
1Clean electrical cabinet surface with isopropyl alcohol to remove machine cutting fluids.
2Peel thick release liner and position plate centered over 22mm or 30mm push button hole cutout.
3Press firmly across foam surface; closed-cell foam backing compresses and creates permanent solvent barrier.
Engineering Tolerance: 0.65 mm foam-backed polyester replicates rigid engraved Bakelite plates at 80% lower cost and zero wait time.
Substrate Compatibility & Adhesion Matrix
Painted Steel Control Panels
Permanent Foam Bond (5/5)
Stainless Steel NEMA 4X Enclosures
Permanent Foam Bond (5/5)
Cast Aluminum Machinery Frames
Permanent Foam Bond (4.9/5)
Polycarbonate HMI Operator Bezels
Permanent Foam Bond (5/5)
Tested Environmental Survivability
NEMA 4X WashdownMachine Cutting FluidsUV Sunlight & WeatheringImpact & Scratching
Recommended Field & Shop Tools:
i3300 / BBP33 Smart BenchtopM510 Portable MakerR6000 Resin Ribbon
Orderable Part Numbers, Packaging & Distributor SKUs
Official Brady SKUs, roll dimensions, package quantities, list pricing, Grainger part numbers, and printer compatibility for B-1.
Custom orderable roll sizes, continuous tapes, and die-cut parts for B-1 are available through authorized Brady distributors.
Quality Assurance, Storage & Regulatory Compliance
Standardized engineering guidelines for warehouse storage, application temperature, and agency certifications.
Shelf Life & Warehouse Storage
Expected Shelf Life: 1 Year from receipt
Storage Temperature: Below 80°F (27°C)
Relative Humidity: ≤ 60% RH
Must be stored in original packaging in a climate-controlled warehouse.
Application vs Service Limits
Min Application Temp: 50°F (10°C)
Service Temp Range: -40°C to 90°C (-40°F to 194°F)
Full Cure / Dwell Time: 24 Hours (ASTM D1000)
Clean surface of oil/grease before bonding for maximum peel strength.
Agency Testing & File Directories
UL 969 / 2238: Non-approved variant
UL DirectoryCSA C22.2: Not certified
CSA DirectoryEnvironmental & Safety Standards
RoHS 3 Compliance:2011/65/EU (Pass 2015/863)
REACH Status:SVHC Free (<0.1% w/w)
CA Prop 65:Compliant Notice
Certificates of Conformance (CoC) available on order shipment.
Sponsored Industrial Label Solutions
Industrial Label Printers & Materials
Relevant Technical Equipment & Consumables [Ad Slot spec-mid-B-1]
ASTM Physical & Mechanical Properties
Standardized laboratory test data measured in accordance with ASTM D 1000, ASTM D 2979, and ASTM D 2671.
Thermal Transfer Ribbon Compatibility
Official Brady recommended ribbons engineered for maximum contrast, smear resistance, and UL certification compliance.
Recommended Thermal Transfer
Non-printable hardware, tag, or pre-printed material.
* Note: Testing print permanence with official Brady ribbons is required to maintain UL/CSA agency certification on printed labels.
Chemical & Solvent Resistance Matrix
Standardized dip and rub immersion test observations across industrial fuels, oils, solvents, and cleaners.
Tested per ASTM D 895 / Brady standard dip & rub immersion.
| Chemical Reagent / Solvent | Substrate / Adhesive Effect | Thermal Ribbon Permanence |
|---|---|---|
| 30% Sulfuric Acid | NE | NE |
| 10% Sulfuric Acid | NE | NE |
| 30% HCI | NE | NE |
| 10% HCI | NE | NE |
| 50% NaOH | NE | NE |
| 10% NaOH | NE | NE |
| Methyl Ethyl Ketone | F | F |
| Acetone | F | F |
| 1,1,1-Trichloroethane | F | F |
| Methanol | NE | NE |
| IPA (Isopropanol) | NE | NE |
| ASTM #3 Oil | NE | NE |
| SAE 20 Oil | NE | NE |
| Alconox® | NE | NE |
| Toluene | F | F |
| Mineral Spirits | NE | NE |
| Glacial Acetic Acid | F | F |
| 5% Acetic Acid | NE | NE |
| Diesel Fuel | NE | NE |
| Heptane | NE | NE |
| Cellosolve Acetate | F | F |
| Conc. Ammonia | NE | NE |
| 10% Ammonia | NE | NE |
| Turpentine | NE | NE |
| Kerosene | NE | NE |
| Water | NE | NE |
| Gasoline | F | F |
| 30% Sulfuric Acid | Tested | Tested |
| 10% Sulfuric Acid | Tested | Tested |
| 30% HCI | Tested | Tested |
| 10% HCI | Tested | Tested |
| 50% NaOH | Tested | Tested |
| 10% NaOH | Tested | Tested |
| Methyl Ethyl Ketone | Tested | Tested |
| Acetone | Tested | Tested |
| 1,1,1-Trichloroethane | Tested | Tested |
| Methanol | Tested | Tested |
| IPA (Isopropanol) | Tested | Tested |
| ASTM #3 Oil | Tested | Tested |
| SAE 20 Oil | Tested | Tested |
| Alconox® | Tested | Tested |
| Toluene | Tested | Tested |
| Mineral Spirits | Tested | Tested |
| Glacial Acetic Acid | Tested | Tested |
| 5% Acetic Acid | Tested | Tested |
| Diesel Fuel | Tested | Tested |
| Heptane | Tested | Tested |
| Cellosolve Acetate | Tested | Tested |
| Conc. Ammonia | Tested | Tested |
| 10% Ammonia | Tested | Tested |
| Turpentine | Tested | Tested |
| Kerosene | Tested | Tested |
| Water | Tested | Tested |
| Gasoline | Tested | Tested |
Environmental & Aging Durability Testing
| Environmental Exposure Condition | Observation & Legibility Result |
|---|---|
| Service temperature | -40 to 90 °C |
Verified Target Applications & Use Cases
- Industrial rating plates, asset identification, and electrical component labeling.