Brady B-115label_film_tape
B-115 POLYMER COATED CLOTH TAPE
Brady B-115 is a polymer coated cloth tape with a matte ink jet printable surface and rubber-based adhesive, suitable for labeling and marking applications requiring an ink jet printable surface.
Material Composition
polymer coated cloth
Adhesive System
rubber-based pressure sensitive adhesive
Operating Temperature
From -40°C
Total Thickness
—
Flexible Nylon Cloth
B-115 Application & Installation Blueprint
Repositionable Nylon Cloth & DIN Rail Label • Physical application tolerances and surface engineering
Industrial Fit Certified
Conformable Cloth Wire & Terminal Marking
1Wrap tightly around wire leads or press firmly across DIN terminal block rows.
2Flexible woven cloth matrix conforms seamlessly to irregular cable curves with zero flagging.
3Can be cleanly removed and repositioned during cabinet wiring changes without leaving sticky residue.
Engineering Tolerance: High-conformability woven polyamide coating grips tight wire curves without flagging or memory spring-back.
Substrate Compatibility & Adhesion Matrix
Terminal Block Rows (Phoenix/WAGO)
High Grip (5/5)
Multi-Conductor Cable Bundles
No Flagging (5/5)
DIN Rail Relay Sockets
Clean Removal (4.8/5)
Patch Panel Wire Flags
High Conform (5/5)
Tested Environmental Survivability
High Flexibility & No FlaggingClean RemovabilityMild Solvents & OilCabinet Temperatures (-40°F to 194°F)
Recommended Field & Shop Tools:
M210 Handheld ToolM610 Wire MarkerTHT Benchtop Printer
Orderable Part Numbers, Packaging & Distributor SKUs
Official Brady SKUs, roll dimensions, package quantities, list pricing, Grainger part numbers, and printer compatibility for B-115.
Custom orderable roll sizes, continuous tapes, and die-cut parts for B-115 are available through authorized Brady distributors.
Quality Assurance, Storage & Regulatory Compliance
Standardized engineering guidelines for warehouse storage, application temperature, and agency certifications.
Shelf Life & Warehouse Storage
Expected Shelf Life: 1 Year from receipt
Storage Temperature: Below 80°F (27°C)
Relative Humidity: ≤ 60% RH
Must be stored in original packaging in a climate-controlled warehouse.
Application vs Service Limits
Min Application Temp: 50°F (10°C)
Service Temp Range: Standard Industrial
Full Cure / Dwell Time: 24 Hours (ASTM D1000)
Clean surface of oil/grease before bonding for maximum peel strength.
Agency Testing & File Directories
UL 969 / 2238: Non-approved variant
UL DirectoryCSA C22.2: Not certified
CSA DirectoryHalogen-Free per DIN VDE 0472 Part 815
Environmental & Safety Standards
RoHS 3 Compliance:2011/65/EU (Pass 2015/863)
REACH Status:SVHC Free (<0.1% w/w)
CA Prop 65:Compliant Notice
Certificates of Conformance (CoC) available on order shipment.
Engineering Limitations & Chemical Fitness Warnings
Extracted directly from Brady Technical Data Sheets to prevent real-world application failures and chemical degradation:
- not recommended for outdoors or environments with high UV exposure
Sponsored Industrial Label Solutions
Industrial Label Printers & Materials
Relevant Technical Equipment & Consumables [Ad Slot spec-mid-B-115]
ASTM Physical & Mechanical Properties
Standardized laboratory test data measured in accordance with ASTM D 1000, ASTM D 2979, and ASTM D 2671.
Thermal Transfer Ribbon Compatibility
Official Brady recommended ribbons engineered for maximum contrast, smear resistance, and UL certification compliance.
Recommended Thermal Transfer
Non-printable hardware, tag, or pre-printed material.
* Note: Testing print permanence with official Brady ribbons is required to maintain UL/CSA agency certification on printed labels.
Chemical & Solvent Resistance Matrix
Standardized dip and rub immersion test observations across industrial fuels, oils, solvents, and cleaners.
Tested per ASTM D 895 / Brady standard dip & rub immersion.
| Chemical Reagent / Solvent | Substrate / Adhesive Effect | Thermal Ribbon Permanence |
|---|---|---|
| Methyl Ethyl Ketone (reagent); topcoat dissolved, print removed when rubbed (observation) | Tested | Tested |
| 1,1,1-Trichloroethane (reagent); adhesive softened (observation) | Tested | Tested |
| Toluene (reagent); adhesive softened, slight smear when rubbed (observation) | Tested | Tested |
| Freon TMS (reagent); no visible effect, slight smear when rubbed (observation) | Tested | Tested |
| Isopropyl Alcohol (reagent); no visible effect, slight smear when rubbed (observation) | Tested | Tested |
| Mineral Spirits (reagent); no visible effect (observation) | Tested | Tested |
| JP-8 Jet Fuel (reagent); no visible effect (observation) | Tested | Tested |
| ASTM #3 Oil (reagent); no visible effect (observation) | Tested | Tested |
| Mil 5606 Oil (reagent); label turned pink (observation) | Tested | Tested |
| Skydrol 500B-4 (reagent); topcoat and adhesive softened, print removed when rubbed (observation) | Tested | Tested |
| Super Agitene (reagent); no visible effect (observation) | Tested | Tested |
| Deionized Water (reagent); no visible effect (observation) | Tested | Tested |
| 3% Alconox Detergent (reagent); moderate smear of print during immersion (observation) | Tested | Tested |
| 10% Sulfuric Acid Solution (reagent); no visible effect (observation) | Tested | Tested |
| 1,1,1-Trichloroethane | Tested | Tested |
| Toluene | Tested | Tested |
| Freon® TMS | Tested | Tested |
| Isopropyl Alcohol | Tested | Tested |
| Mineral Spirits | Tested | Tested |
| JP-8 Jet Fuel | Tested | Tested |
| ASTM #3 Oil | Tested | Tested |
| Mil 5606 Oil | Tested | Tested |
| Super Agitene® | Tested | Tested |
| Deionized Water | Tested | Tested |
| 3% Alconox® Detergent | Tested | Tested |
| 10% Sulfuric Acid Solution | Tested | Tested |
Environmental & Aging Durability Testing
| Environmental Exposure Condition | Observation & Legibility Result |
|---|---|
| Service temperature (min) | -40 °C |
Verified Target Applications & Use Cases
- Industrial rating plates, asset identification, and electrical component labeling.