Brady B-388label_film_tape4 Orderable SKUs
B-388 STANDARD TEMPERATURE CABLE MARKER
B-388 cable markers are high performance wire bundle and cable identification tags designed for continuous operating temperatures up to 135°C.
Material Composition
PolyolefinAvailable Colors:White, yellow APPLICATIONS:B-388 cable markers are designed as a high performance wire bundle and cable identification tag. This standardtemperature cable marker is meant for areas with continuous operating temperature up to 135°C. RECOMMENDED RIBBONBrady R6600 series black ribbon
Adhesive System
Non-Adhesive
Operating Temperature
-55°C to 135°C (-67°F to 275°F)
Total Thickness
3 mils (0.076 mm)
Industrial Safety & Asset Marker
B-388 Application & Installation Blueprint
Heavy-Duty Industrial Safety & Identification Marker • Physical application tolerances and surface engineering
Industrial Fit Certified
Standard Industrial Marking Procedure
1Ensure application surface is dry and free of loose particulate or heavy oil.
2Peel and apply with steady firm pressure from center to edge.
3Allow 24 hours for ultimate cross-linked adhesion strength.
Engineering Tolerance: Engineered to withstand standard industrial plant environmental conditions and indoor/outdoor temperature swings.
Substrate Compatibility & Adhesion Matrix
Smooth Metals & Stainless Steel
Standard Bond (5/5)
Rigid Thermoplastics & ABS
Standard Bond (4.8/5)
Painted Metal Cabinets
Standard Bond (4.8/5)
Glass & Smooth Composite
Standard Bond (4.8/5)
Tested Environmental Survivability
Industrial Plant Temperature SwingsDust, Grease & Mild FluidsStandard Abrasion & RubbingLong-Term Legend Legibility
Recommended Field & Shop Tools:
i3300 / i5100 Benchtop PrinterM210 / M610 Handheld ToolStandard Thermal Ribbon
Orderable Part Numbers, Packaging & Distributor SKUs
Official Brady SKUs, roll dimensions, package quantities, list pricing, Grainger part numbers, and printer compatibility for B-388.
Popular B-388 Formats
Standard industrial rolls and die-cut sizes with unit cost breakdown#1 Popular Choice
Standard Part
HSCMST-800-2-WT-1
0.8 in H x 2.025 in W
Roll of 1000 Labels
Roll / Pack Total:$1379.00 USD
Normalized Unit Cost:$1.38/label
Material Area Cost:$0.85/sq in
Supported Hardware:
i7100PR PlusTHT 3" Core Printers+1
#2 Standard Format
Standard Part
HSCMST-410-2-W-1.5
0.41 in H x 2.025 in W
Roll of 1500 Labels
Roll / Pack Total:$1869.00 USD
Normalized Unit Cost:$1.25/label
Material Area Cost:$1.50/sq in
Supported Hardware:
i7100PR PlusTHT 3" Core Printers+1
#3 High Capacity
Standard Part
HSCMST-800-2-Y-1
0.8 in H x 2.025 in W
Roll of 1000 Labels
Roll / Pack Total:$3529.00 USD
Normalized Unit Cost:$3.53/label
Material Area Cost:$2.18/sq in
Supported Hardware:
i7100PR PlusTHT 3" Core Printers+1
All 4 Orderable Part Numbers
Pricing: $1379.00 – $3859.00 USD
| Catalog SKU | Dimensions | Packaging / Qty | List Price & Unit Cost | Order MOQ | Compatible Printers | Hardware & Related |
|---|---|---|---|---|---|---|
HSCMST-800-2-WT-1Popular UPC: 754473615956 | 0.8 in H x 2.025 in W | Roll of 1000 Labels | $1379.00 USD $1.38/label ($137.90/100) $0.85/sq in | 1 ROL Standard Order | i7100PR Plus+2 | |
HSCMST-410-2-W-1.5Popular UPC: 754473615949 | 0.41 in H x 2.025 in W | Roll of 1500 Labels | $1869.00 USD $1.25/label ($124.60/100) $1.50/sq in | 1 ROL Standard Order | i7100PR Plus+2 | |
HSCMST-800-2-Y-1 UPC: 754473615970 | 0.8 in H x 2.025 in W | Roll of 1000 Labels | $3529.00 USD $3.53/label ($352.90/100) $2.18/sq in | 1 ROL Standard Order | i7100PR Plus+2 | |
HSCMST-410-2-Y-1.5 UPC: 754473615963 | 0.41 in H x 2.025 in W | Roll of 1500 Labels | $3859.00 USD $2.57/label ($257.27/100) $3.10/sq in | 1 ROL Standard Order | i7100PR Plus+2 |
Quality Assurance, Storage & Regulatory Compliance
Standardized engineering guidelines for warehouse storage, application temperature, and agency certifications.
Shelf Life & Warehouse Storage
Expected Shelf Life: 1 Year from receipt
Storage Temperature: Below 80°F (27°C)
Relative Humidity: ≤ 60% RH
Must be stored in original packaging in a climate-controlled warehouse.
Application vs Service Limits
Min Application Temp: 50°F (10°C)
Service Temp Range: -55°C to 135°C (-67°F to 275°F)
Full Cure / Dwell Time: 24 Hours (ASTM D1000)
Clean surface of oil/grease before bonding for maximum peel strength.
Agency Testing & File Directories
UL 969 / 2238: Non-approved variant
UL DirectoryCSA C22.2: Not certified
CSA DirectoryEnvironmental & Safety Standards
RoHS 3 Compliance:2011/65/EU (Pass 2015/863)
REACH Status:SVHC Free (<0.1% w/w)
CA Prop 65:Compliant Notice
Certificates of Conformance (CoC) available on order shipment.
Sponsored Industrial Label Solutions
Industrial Label Printers & Materials
Relevant Technical Equipment & Consumables [Ad Slot spec-mid-B-388]
ASTM Physical & Mechanical Properties
Standardized laboratory test data measured in accordance with ASTM D 1000, ASTM D 2979, and ASTM D 2671.
Thermal Transfer Ribbon Compatibility
Official Brady recommended ribbons engineered for maximum contrast, smear resistance, and UL certification compliance.
Recommended Thermal Transfer
Non-printable hardware, tag, or pre-printed material.
* Note: Testing print permanence with official Brady ribbons is required to maintain UL/CSA agency certification on printed labels.
Chemical & Solvent Resistance Matrix
Standardized dip and rub immersion test observations across industrial fuels, oils, solvents, and cleaners.
Tested per ASTM D 895 / Brady standard dip & rub immersion.
| Chemical Reagent / Solvent | Substrate / Adhesive Effect | Thermal Ribbon Permanence |
|---|---|---|
| Isopropyl alcohol | No visible effect | No visible effect |
| Methyl Ethyl Ketone | Slight smear or print removal, detectable but minimal smear | Slight smear or print removal, detectable but minimal smear |
| Gasoline | Moderate smear or print removal (print still legible) | Moderate smear or print removal (print still legible) |
| Diesel Fuel | Slight smear or print removal, detectable but minimal smear | Slight smear or print removal, detectable but minimal smear |
| MIL 5606 Oil | No visible effect | No visible effect |
| *120W Oil | No visible effect | No visible effect |
| Skydrol ® 500 B-4 | Slight color shift was observed | Slight color shift was observed |
| JP-8 Jet Fuel | No visible effect | No visible effect |
| 10% NaCl | No visible effect | No visible effect |
| Deionized Water | No visible effect | No visible effect |
| Isopropyl alcohol | Tested | Tested |
| Methyl Ethyl Ketone | Tested | Tested |
| Diesel Fuel | Tested | Tested |
| MIL 5606 Oil | Tested | Tested |
| 120W Oil | Tested | Tested |
| Skydrol ® 500 B-4 | Tested | Tested |
| JP-8 Jet Fuel | Tested | Tested |
| 10% NaCl | Tested | Tested |
| Deionized Water | Tested | Tested |
Environmental & Aging Durability Testing
| Environmental Exposure Condition | Observation & Legibility Result |
|---|---|
| 388 STANDARD TEMPERATURE CABLE MARKER - Material Spec (Brady B-388) Material family | B-388 |
| 388 cable markers are high performance wire bundle and cable identification tags designed for continuous operating temperatures up to 135°C. ## Verified specifications - Thickness | 0.020 +/- 0.003 inches |
| Service temperature | -55 to 135 °C |
Verified Target Applications & Use Cases
- Industrial rating plates, asset identification, and electrical component labeling.