Brady B-565label_film_tape7 Orderable SKUs
B-565 METALLIZED POLYESTER TAPE
Brady B-565 is a metallized polyester film with a permanent acrylic pressure sensitive adhesive and topcoat designed for thermal transfer printing, suitable for identification labels or rating plates requiring barcode and alphanumeric quality.
Material Composition
—
Adhesive System
Permanent pressure sensitive acrylic
Operating Temperature
-40°C to 110°C (-40°F to 230°F)
Total Thickness
2.8 mils (0.07 mm)
Industrial Safety & Asset Marker
B-565 Application & Installation Blueprint
Heavy-Duty Industrial Safety & Identification Marker • Physical application tolerances and surface engineering
Industrial Fit Certified
Standard Industrial Marking Procedure
1Ensure application surface is dry and free of loose particulate or heavy oil.
2Peel and apply with steady firm pressure from center to edge.
3Allow 24 hours for ultimate cross-linked adhesion strength.
Engineering Tolerance: Engineered to withstand standard industrial plant environmental conditions and indoor/outdoor temperature swings.
Substrate Compatibility & Adhesion Matrix
Smooth Metals & Stainless Steel
Standard Bond (5/5)
Rigid Thermoplastics & ABS
Standard Bond (4.8/5)
Painted Metal Cabinets
Standard Bond (4.8/5)
Glass & Smooth Composite
Standard Bond (4.8/5)
Tested Environmental Survivability
Industrial Plant Temperature SwingsDust, Grease & Mild FluidsStandard Abrasion & RubbingLong-Term Legend Legibility
Recommended Field & Shop Tools:
i3300 / i5100 Benchtop PrinterM210 / M610 Handheld ToolStandard Thermal Ribbon
Orderable Part Numbers, Packaging & Distributor SKUs
Official Brady SKUs, roll dimensions, package quantities, list pricing, Grainger part numbers, and printer compatibility for B-565.
Popular B-565 Formats
Standard industrial rolls and die-cut sizes with unit cost breakdown#1 Popular Choice
Standard Part
B30C-4000-565-SL
4 in W x 100 ft L
Cartridge of 100 Feet
Roll / Pack Total:$518.99 USD
Normalized Unit Cost:$5.19/ft
Material Area Cost:$0.11/sq in
Supported Hardware:
BBP30BBP31BBP33+8
#2 Standard Format
Standard Part
B30C-2250-565-SL
2.25 in W x 100 ft L
Cartridge of 100 Feet
Roll / Pack Total:$289.99 USD
Normalized Unit Cost:$2.90/ft
Material Area Cost:$0.11/sq in
Supported Hardware:
BBP30BBP31BBP33+8
#3 High Capacity
Standard Part
B30C-1125-565-SL
1.125 in W x 100 ft L
Cartridge of 100 Feet
Roll / Pack Total:$186.99 USD
Normalized Unit Cost:$1.87/ft
Material Area Cost:$0.14/sq in
Supported Hardware:
BBP30BBP31BBP33+8
All 7 Orderable Part Numbers
Pricing: $186.99 – $705.99 USD
| Catalog SKU | Dimensions | Packaging / Qty | List Price & Unit Cost | Order MOQ | Compatible Printers | Hardware & Related |
|---|---|---|---|---|---|---|
B30C-4000-565-SLPopular UPC: 754473210045 | 4 in W x 100 ft L | Cartridge of 100 Feet | $518.99 USD $5.19/ft ($0.43/in) $0.11/sq in | 1 ROL Standard Order | BBP30BBP31+9 | |
B30C-2250-565-SLPopular UPC: 754473210052 | 2.25 in W x 100 ft L | Cartridge of 100 Feet | $289.99 USD $2.90/ft ($0.24/in) $0.11/sq in | 1 ROL Standard Order | BBP30BBP31+9 | |
B30C-1125-565-SLPopular UPC: 754473210069 | 1.125 in W x 100 ft L | Cartridge of 100 Feet | $186.99 USD $1.87/ft ($0.16/in) $0.14/sq in | 1 ROL Standard Order | BBP30BBP31+9 | |
114533 UPC: 754473146399 | 4 in W x 100 ft L | Roll of 100 Feet | $705.99 USD $7.06/ft ($0.59/in) $0.15/sq in | 1 ROL Standard Order | GlobalMark | |
76720 UPC: 754473767204 | 4.25 in W x 100 ft L | Roll of 100 Feet | $705.99 USD $7.06/ft ($0.59/in) $0.14/sq in | 1 ROL Standard Order | GlobalMark | |
76721 UPC: 754473767211 | 2.25 in W x 100 ft L | Roll of 100 Feet | $456.99 USD $4.57/ft ($0.38/in) $0.17/sq in | 1 ROL Standard Order | GlobalMark | |
76722 UPC: 754473767228 | 1.125 in W x 100 ft L | Roll of 100 Feet | $286.99 USD $2.87/ft ($0.24/in) $0.21/sq in | 1 ROL Standard Order | GlobalMark |
Quality Assurance, Storage & Regulatory Compliance
Standardized engineering guidelines for warehouse storage, application temperature, and agency certifications.
Shelf Life & Warehouse Storage
Expected Shelf Life: 1 Year from receipt
Storage Temperature: Below 80°F (27°C)
Relative Humidity: ≤ 60% RH
Must be stored in original packaging in a climate-controlled warehouse.
Application vs Service Limits
Min Application Temp: 50°F (10°C)
Service Temp Range: -40°C to 110°C (-40°F to 230°F)
Full Cure / Dwell Time: 24 Hours (ASTM D1000)
Clean surface of oil/grease before bonding for maximum peel strength.
Agency Testing & File Directories
UL 969 / 2238: Non-approved variant
UL DirectoryCSA C22.2: Not certified
CSA DirectoryEnvironmental & Safety Standards
RoHS 3 Compliance:2011/65/EU (Pass 2015/863)
REACH Status:SVHC Free (<0.1% w/w)
CA Prop 65:Compliant Notice
Certificates of Conformance (CoC) available on order shipment.
Sponsored Industrial Label Solutions
Industrial Label Printers & Materials
Relevant Technical Equipment & Consumables [Ad Slot spec-mid-B-565]
ASTM Physical & Mechanical Properties
Standardized laboratory test data measured in accordance with ASTM D 1000, ASTM D 2979, and ASTM D 2671.
Thermal Transfer Ribbon Compatibility
Official Brady recommended ribbons engineered for maximum contrast, smear resistance, and UL certification compliance.
Recommended Thermal Transfer
Non-printable hardware, tag, or pre-printed material.
* Note: Testing print permanence with official Brady ribbons is required to maintain UL/CSA agency certification on printed labels.
Chemical & Solvent Resistance Matrix
Standardized dip and rub immersion test observations across industrial fuels, oils, solvents, and cleaners.
Tested per ASTM D 895 / Brady standard dip & rub immersion.
| Chemical Reagent / Solvent | Substrate / Adhesive Effect | Thermal Ribbon Permanence |
|---|---|---|
| 30% Sulfuric Acid NE NE NE | Tested | Tested |
| 10% Sulfuric Acid F NE NE | Tested | Tested |
| 30% Hydrochloric Acid NE NE NE | Tested | Tested |
| 10% Hydrochloric Acid NE NE NE | Tested | Tested |
| Glacial Acetic Acid F F F | Tested | Tested |
| 5% Acetic Acid NE NE NE | Tested | Tested |
| 50% Sodium Hydroxide F NE NE | Tested | Tested |
| 10% Sodium Hydroxide F NE NE | Tested | Tested |
| 10% Ammonia NE NE NE | Tested | Tested |
| 5% Sodium Hypochlorite NE NE NE | Tested | Tested |
| Methyl Ethyl Ketone F F F | Tested | Tested |
| Acetone F F F | Tested | Tested |
| Toluene F F F | Tested | Tested |
| 1,1,1-Trichloroethane F F F | Tested | Tested |
| Methanol NE NE NE | Tested | Tested |
| Isopropyl Alcohol F NE NE | Tested | Tested |
| Heptane NE NE NE | Tested | Tested |
| Mineral Spirits NE NE NE | Tested | Tested |
| Turpentine F NE NE | Tested | Tested |
| Kerosene NE NE NE | Tested | Tested |
| Diesel Fuel NE NE NE | Tested | Tested |
| Gasoline F NE F | Tested | Tested |
| ASTM #3 Oil NE NE NE | Tested | Tested |
| SAE 20 Oil NE NE NE | Tested | Tested |
| 10% Sodium Chloride NE NE NE | Tested | Tested |
| Alconox® NE NE NE | Tested | Tested |
| Water NE NE NE | Tested | Tested |
Environmental & Aging Durability Testing
| Environmental Exposure Condition | Observation & Legibility Result |
|---|---|
| 565 is a metallized polyester film with a permanent acrylic pressure sensitive adhesive and topcoat designed for thermal transfer printing, suitable for identification labels or rating plates requiring barcode and alphanumeric quality. ## Verified specifications - Thickness | .0028 in. (.07 mm) |
| Service temperature | -40 to 110 °C |
Verified Target Applications & Use Cases
- Industrial rating plates, asset identification, and electrical component labeling.