Brady B-6425 label_film_tape
B-6425 BRADY B-6425 is a white polypropylene label stock with a matte finish and permanent adhesive, suitable for wire and cable marking but not recommended for long-term outdoor use.
Material Composition White Polypropylene
Operating Temperature -40°C to 100°C (-40°F to 212°F)
B-6425 Application & Installation Blueprint Self-Laminating Wire & Cable Marker • Physical application tolerances and surface engineering
Installed in real-world industrial environment Inspect Self-Laminating 360° Overlap Wrap Installation 1 Position the white opaque printable zone directly against the copper/PVC wire insulation.
2 Wrap the cable firmly so the clear transparent overlaminate tail wraps 360° completely around the wire.
3 Ensure the clear tail overlaps the printed text by at least 1/4" to seal against oils, solvents, and abrasion.
Engineering Tolerance: Recommended Overlap: 360° full circumference + 0.25" to 0.50" clear tail overlap.
Substrate Compatibility & Adhesion Matrix PVC & PUR Insulated Cable
Cat5e / Cat6 UTP Network Wires
Tefzel / PTFE Aerospace Wiring
Tested Environmental Survivability IPA & Mineral Spirits Hydraulic Oil & Gasoline Abrasion & Friction Water & Humidity Recommended Field & Shop Tools:
M210 / M610 Portable Printer Wraptor A6500 Automated Machine Manual Thumb Roll
Orderable Part Numbers, Packaging & Distributor SKUs Official Brady SKUs, roll dimensions, package quantities, list pricing, Grainger part numbers, and printer compatibility for B-6425 .
Custom orderable roll sizes, continuous tapes, and die-cut parts for B-6425 are available through authorized Brady distributors.
Quality Assurance, Storage & Regulatory Compliance Standardized engineering guidelines for warehouse storage, application temperature, and agency certifications.
Shelf Life & Warehouse Storage Expected Shelf Life: 1 Year from receipt
Storage Temperature: Below 80°F (27°C)
Relative Humidity: ≤ 60% RH
Must be stored in original packaging in a climate-controlled warehouse.
Application vs Service Limits Min Application Temp: 50°F (10°C)
Service Temp Range: -40°C to 100°C (-40°F to 212°F)
Full Cure / Dwell Time: 24 Hours (ASTM D1000)Clean surface of oil/grease before bonding for maximum peel strength.
Agency Testing & File Directories Environmental & Safety Standards RoHS 3 Compliance: 2011/65/EU (Pass 2015/863)
REACH Status: SVHC Free (<0.1% w/w)
CA Prop 65: Compliant Notice
Certificates of Conformance (CoC) available on order shipment.
Engineering Limitations & Chemical Fitness Warnings Extracted directly from Brady Technical Data Sheets to prevent real-world application failures and chemical degradation:
not recommended for long-term outdoor use Sponsored Industrial Label Solutions
Industrial Label Printers & Materials
Relevant Technical Equipment & Consumables [Ad Slot spec-mid-B-6425]
ASTM Physical & Mechanical Properties Standardized laboratory test data measured in accordance with ASTM D 1000, ASTM D 2979, and ASTM D 2671.
Physical Property Test Method Standard Test Units (US) Metric Units (SI)
Thermal Transfer Ribbon Compatibility Official Brady recommended ribbons engineered for maximum contrast, smear resistance, and UL certification compliance.
Recommended Thermal Transfer Non-printable hardware, tag, or pre-printed material.
* Note: Testing print permanence with official Brady ribbons is required to maintain UL/CSA agency certification on printed labels.
Chemical & Solvent Resistance Matrix Standardized dip and rub immersion test observations across industrial fuels, oils, solvents, and cleaners.
No standardized ASTM chemical dip/rub test data is published on the official Brady TDS for B-6425.
Environmental & Aging Durability Testing Environmental Exposure Condition Observation & Legibility Result Service temperature -40 to 100 °C
Verified Target Applications & Use Cases Industrial rating plates, asset identification, and electrical component labeling. 