Brady B-736label_film_tape
B-736 ECONOMY PIPE MARKERS ON A ROLL
Brady B-736 Pipe Markers on a Roll are surface printed film markers with permanent pressure sensitive adhesive, suitable for use on clean and dry pipes.
Material Composition
Plastic film
Adhesive System
Permanent pressure sensitive
Operating Temperature
-40°C to 100°C (-40°F to 212°F)
Total Thickness
33 mils (0.083 mm)
Facility & Pipe Marker
B-736 Application & Installation Blueprint
All-Weather Industrial Vinyl & Pipe Marker • Physical application tolerances and surface engineering
Industrial Fit Certified
Pipe Marker & Surface Adhesion Procedure
1Clean pipe or tank surface with 70% IPA to remove oils, dust, and grease.
2Orient directional flow arrow in accordance with ANSI/ASME A13.1 piping standards.
3Apply vinyl with firm squeegee pressure from center outwards to ensure full acrylic wet-out on curved metal.
Engineering Tolerance: 8–10 Year Outdoor Durability. High-tack adhesive conforms to pipes down to 0.5" OD and rough vessels.
Substrate Compatibility & Adhesion Matrix
Galvanized & Stainless Steel Piping
High Tack (5/5)
Powder-Coated Steel Tanks
High Tack (5/5)
Fiberglass & Structural Steel
High Tack (4.8/5)
PVC & Conduit Piping
High Tack (5/5)
Tested Environmental Survivability
8–10 Year UV SunlightWashdown & Salt SprayChemical Reagents & Acids-40°F to 180°F Outdoor Temp
Recommended Field & Shop Tools:
i3300 / BBP37 Sign PrinterM710 Handheld PrinterFelt Squeegee Roller
Orderable Part Numbers, Packaging & Distributor SKUs
Official Brady SKUs, roll dimensions, package quantities, list pricing, Grainger part numbers, and printer compatibility for B-736.
Custom orderable roll sizes, continuous tapes, and die-cut parts for B-736 are available through authorized Brady distributors.
Quality Assurance, Storage & Regulatory Compliance
Standardized engineering guidelines for warehouse storage, application temperature, and agency certifications.
Shelf Life & Warehouse Storage
Expected Shelf Life: 1 Year from receipt
Storage Temperature: Below 80°F (27°C)
Relative Humidity: ≤ 60% RH
Must be stored in original packaging in a climate-controlled warehouse.
Application vs Service Limits
Min Application Temp: 50°F (10°C)
Service Temp Range: -40°C to 100°C (-40°F to 212°F)
Full Cure / Dwell Time: 24 Hours (ASTM D1000)
Clean surface of oil/grease before bonding for maximum peel strength.
Agency Testing & File Directories
UL 969 / 2238: Non-approved variant
UL DirectoryCSA C22.2: Not certified
CSA DirectoryEnvironmental & Safety Standards
RoHS 3 Compliance:2011/65/EU (Pass 2015/863)
REACH Status:SVHC Free (<0.1% w/w)
CA Prop 65:Compliant Notice
Certificates of Conformance (CoC) available on order shipment.
Sponsored Industrial Label Solutions
Industrial Label Printers & Materials
Relevant Technical Equipment & Consumables [Ad Slot spec-mid-B-736]
ASTM Physical & Mechanical Properties
Standardized laboratory test data measured in accordance with ASTM D 1000, ASTM D 2979, and ASTM D 2671.
Thermal Transfer Ribbon Compatibility
Official Brady recommended ribbons engineered for maximum contrast, smear resistance, and UL certification compliance.
Recommended Thermal Transfer
Non-printable hardware, tag, or pre-printed material.
* Note: Testing print permanence with official Brady ribbons is required to maintain UL/CSA agency certification on printed labels.
Chemical & Solvent Resistance Matrix
Standardized dip and rub immersion test observations across industrial fuels, oils, solvents, and cleaners.
Tested per ASTM D 895 / Brady standard dip & rub immersion.
| Chemical Reagent / Solvent | Substrate / Adhesive Effect | Thermal Ribbon Permanence |
|---|---|---|
| 30% Sulfuric Acid | Tested | Tested |
| 10% Sulfuric Acid | Tested | Tested |
| 30% Hydrochloric Acid | Tested | Tested |
| 10% Hydrochloric Acid | Tested | Tested |
| Glacial Acetic Acid | Tested | Tested |
| 5% Acetic Acid | Tested | Tested |
| 50% Sodium Hydroxide | Tested | Tested |
| 10% Sodium Hydroxide | Tested | Tested |
| 10% Ammonia | Tested | Tested |
| 5% Sodium Hypochlorite | Tested | Tested |
| Methyl Ethyl Ketone | Tested | Tested |
| Acetone | Tested | Tested |
| Toluene | Tested | Tested |
| 1,1,1-Trichloroethane | Tested | Tested |
| Methanol | Tested | Tested |
| Isopropyl Alcohol | Tested | Tested |
| Heptane | Tested | Tested |
| Mineral Spirits | Tested | Tested |
| Turpentine | Tested | Tested |
| Kerosene | Tested | Tested |
| Diesel Fuel | Tested | Tested |
| Gasoline | Tested | Tested |
| ASTM #3 Oil | Tested | Tested |
| SAE 20 Oil | Tested | Tested |
| 10% Sodium Chloride | Tested | Tested |
| Alconox® | Tested | Tested |
Environmental & Aging Durability Testing
| Environmental Exposure Condition | Observation & Legibility Result |
|---|---|
| Service temperature | -40 to 100 °C |
Verified Target Applications & Use Cases
- Industrial rating plates, asset identification, and electrical component labeling.