Brady B-7649label_film_tape
Blue Metal Detectable Cable Tags
Brady B-7649 Blue Metal Detectable Cable Tags are made of polyethylene and can be detected by metal detectors, suitable for use in the food-and beverage industry and pharma industry.
Material Composition
Polyethylene
Adhesive System
Non-Adhesive
Operating Temperature
-40°C to 60°C (-40°F to 140°F)
Total Thickness
—
Metal Detectable Food Safe
B-7649 Application & Installation Blueprint
Metal & X-Ray Detectable Food Safety Marker • Physical application tolerances and surface engineering
Industrial Fit Certified
Sanitary Washdown & Metal Detectable Placement
1Apply directly to food processing equipment, sanitary lines, or conveyor guides.
2Embedded metallic foil layer allows inline metal detectors to detect stray label fragments as small as 2mm.
3Withstands aggressive CIP chemical sanitizing washdowns.
Engineering Tolerance: Detects particles as small as 2mm in food product streams. Survives harsh sanitizing CIP washdown cycles.
Substrate Compatibility & Adhesion Matrix
Food Contact Stainless Steel
Sanitary Bond (5/5)
Sanitary Tri-Clamp Piping
Washdown Proof (5/5)
Conveyor Belt Side Rails
Detectable (4.8/5)
Processing Kettle Surfaces
Washdown Proof (5/5)
Tested Environmental Survivability
CIP Sanitizing ChemicalsInline Metal & X-Ray DetectionHigh-Pressure Hot WashdownFDA Compliant Packaging
Recommended Field & Shop Tools:
i3300 Benchtop PrinterR6000 Halogen-Free Ribbon
Orderable Part Numbers, Packaging & Distributor SKUs
Official Brady SKUs, roll dimensions, package quantities, list pricing, Grainger part numbers, and printer compatibility for B-7649.
Custom orderable roll sizes, continuous tapes, and die-cut parts for B-7649 are available through authorized Brady distributors.
Quality Assurance, Storage & Regulatory Compliance
Standardized engineering guidelines for warehouse storage, application temperature, and agency certifications.
Shelf Life & Warehouse Storage
Expected Shelf Life: 1 Year from receipt
Storage Temperature: Below 80°F (27°C)
Relative Humidity: ≤ 60% RH
Must be stored in original packaging in a climate-controlled warehouse.
Application vs Service Limits
Min Application Temp: 50°F (10°C)
Service Temp Range: -40°C to 60°C (-40°F to 140°F)
Full Cure / Dwell Time: 24 Hours (ASTM D1000)
Clean surface of oil/grease before bonding for maximum peel strength.
Agency Testing & File Directories
UL 969 / 2238: Non-approved variant
UL DirectoryCSA C22.2: Not certified
CSA DirectoryEnvironmental & Safety Standards
RoHS 3 Compliance:2011/65/EU (Pass 2015/863)
REACH Status:SVHC Free (<0.1% w/w)
CA Prop 65:Compliant Notice
Certificates of Conformance (CoC) available on order shipment.
Sponsored Industrial Label Solutions
Industrial Label Printers & Materials
Relevant Technical Equipment & Consumables [Ad Slot spec-mid-B-7649]
ASTM Physical & Mechanical Properties
Standardized laboratory test data measured in accordance with ASTM D 1000, ASTM D 2979, and ASTM D 2671.
Thermal Transfer Ribbon Compatibility
Official Brady recommended ribbons engineered for maximum contrast, smear resistance, and UL certification compliance.
Recommended Thermal Transfer
Non-printable hardware, tag, or pre-printed material.
* Note: Testing print permanence with official Brady ribbons is required to maintain UL/CSA agency certification on printed labels.
Chemical & Solvent Resistance Matrix
Standardized dip and rub immersion test observations across industrial fuels, oils, solvents, and cleaners.
Tested per ASTM D 895 / Brady standard dip & rub immersion.
| Chemical Reagent / Solvent | Substrate / Adhesive Effect | Thermal Ribbon Permanence |
|---|---|---|
| Isopropyl Alcohol | Tested | Tested |
| N-hexane | Tested | Tested |
| Acetone | Tested | Tested |
| Ethanol (96%) | Tested | Tested |
| Distilled Water | Tested | Tested |
| 5% Soap solution Extran MA02 | Tested | Tested |
Environmental & Aging Durability Testing
| Environmental Exposure Condition | Observation & Legibility Result |
|---|---|
| Service temperature | -40 to 60 °C |
Verified Target Applications & Use Cases
- Industrial rating plates, asset identification, and electrical component labeling.