Brady BA-147 label_film_tape
BA-147 BA-147 is a self-wound, unsupported adhesive with permanent acrylic properties, providing good bonding to various substrates and offering good temperature performance and chemical resistance.
Material Composition Self-Wound, unsupported adhesive
Adhesive System Permanentacrylic
Operating Temperature Standard Industrial
Industrial Safety & Asset Marker BA-147 Application & Installation Blueprint Heavy-Duty Industrial Safety & Identification Marker • Physical application tolerances and surface engineering
Installed in real-world industrial environment Inspect Standard Industrial Marking Procedure 1 Ensure application surface is dry and free of loose particulate or heavy oil.
2 Peel and apply with steady firm pressure from center to edge.
3 Allow 24 hours for ultimate cross-linked adhesion strength.
Engineering Tolerance: Engineered to withstand standard industrial plant environmental conditions and indoor/outdoor temperature swings.
Substrate Compatibility & Adhesion Matrix Smooth Metals & Stainless Steel
Rigid Thermoplastics & ABS
Tested Environmental Survivability Industrial Plant Temperature Swings Dust, Grease & Mild Fluids Standard Abrasion & Rubbing Long-Term Legend Legibility Recommended Field & Shop Tools:
i3300 / i5100 Benchtop Printer M210 / M610 Handheld Tool Standard Thermal Ribbon
Orderable Part Numbers, Packaging & Distributor SKUs Official Brady SKUs, roll dimensions, package quantities, list pricing, Grainger part numbers, and printer compatibility for BA-147 .
Custom orderable roll sizes, continuous tapes, and die-cut parts for BA-147 are available through authorized Brady distributors.
Quality Assurance, Storage & Regulatory Compliance Standardized engineering guidelines for warehouse storage, application temperature, and agency certifications.
Shelf Life & Warehouse Storage Expected Shelf Life: 1 Year from receipt
Storage Temperature: Below 80°F (27°C)
Relative Humidity: ≤ 60% RH
Must be stored in original packaging in a climate-controlled warehouse.
Application vs Service Limits Min Application Temp: 50°F (10°C)
Service Temp Range: Standard Industrial
Full Cure / Dwell Time: 24 Hours (ASTM D1000)Clean surface of oil/grease before bonding for maximum peel strength.
Agency Testing & File Directories Environmental & Safety Standards RoHS 3 Compliance: 2011/65/EU (Pass 2015/863)
REACH Status: SVHC Free (<0.1% w/w)
CA Prop 65: Compliant Notice
Certificates of Conformance (CoC) available on order shipment.
Sponsored Industrial Label Solutions
Industrial Label Printers & Materials
Relevant Technical Equipment & Consumables [Ad Slot spec-mid-BA-147]
ASTM Physical & Mechanical Properties Standardized laboratory test data measured in accordance with ASTM D 1000, ASTM D 2979, and ASTM D 2671.
Physical Property Test Method Standard Test Units (US) Metric Units (SI) Adhesive Layer Only ASTM D 1000 3 mils 0.0782 mm Polyken™ Probe Tack ASTM D 2979 60 oz 500 grams
Thermal Transfer Ribbon Compatibility Official Brady recommended ribbons engineered for maximum contrast, smear resistance, and UL certification compliance.
Recommended Thermal Transfer Non-printable hardware, tag, or pre-printed material.
* Note: Testing print permanence with official Brady ribbons is required to maintain UL/CSA agency certification on printed labels.
Chemical & Solvent Resistance Matrix Standardized dip and rub immersion test observations across industrial fuels, oils, solvents, and cleaners.
No standardized ASTM chemical dip/rub test data is published on the official Brady TDS for BA-147.
Verified Target Applications & Use Cases Industrial rating plates, asset identification, and electrical component labeling. 