Brady A55-22-483 QuickFlag™ Tapered Wire and Cable Flag Labels for A5500 Printer
Formulated from Brady B-483A White polyester, glossy finish, permanent rubber based adhesive with permanent acrylic adhesive. Engineered for 0.5" W × 1.75" H industrial labeling applications.
Engineered Technical Features
- Non-adhesive one-sided printable area and tapered adhesive wrap-around tail for fast cable flagging
- Patent-pending design with a tapered adhesive side to create easy-to-apply wire and cable flags without mismatched edges or exposed adhesive
- Eliminates tedious edge alignment to make the flagging process faster with fewer re-wraps and wasted flags
- Tough polyester material resists abrasions, temperatures of -40° to 248°F (-40° to 120°C) and solvents such as fuel, oil and water
- Ultra-aggressive rubber-based adhesive on the tapered side enables permanent use
- UL Recognized to UL969, CSA accepted and RoHS Compliant to 2011/65/EU (Pass 2015/863)
- For material specific performance and properties, please refer to the Technical Data Sheet (TDS)
- A ribbon is required to print this material; use part number SSR6006
Compatible Brady Printers & Thermal Transfer Ribbon Pairing
Verified hardware compatibility and recommended ribbon formulations for A55-22-483.
Full Technical & Material Specifications (ASTM / UL Testing)
| Material Formulation: | Brady B-483A (B-483A Industrial Material) | Continuous Temp Range: | -40°F to 250°F (-40°C to 121°C) |
| Substrate Polymer Chemistry: | White polyester, glossy finish, permanent rubber based adhesive | Total Material Thickness: | 0.004 in (0.102 mm) |
| Adhesive Formulation: | Permanent Acrylic | ASTM D1000 Stainless Steel Peel: | 50+ oz/in |
| ASTM D1000 Polypropylene Peel: | 35+ oz/in | ASTM D1000 Powder Coat Peel: | 40+ oz/in |
| UL 969 Recognition: | UL 969 (File MH17154 / MH10939) | CSA C22.2 Acceptance: | CSA C22.2 No. 0.15 |
| RoHS / Halogen Compliance: | RoHS Compliant • Standard Formulation | Surface Finish: | Glossy |
Related Sibling SKUs & Alternate Formats
Engineering & Specifier FAQs for A55-22-483
Can I print Brady A55-22-483 on a standard portable printer?
A55-22-483 is a bulk roll engineered for benchtop printers (such as the i3300, i5100, i7100, and PR Plus series) with 3-inch core diameter holders.
Is Brady A55-22-483 recognized under UL 969 for electrical panel rating plates?
Yes, A55-22-483 is manufactured from Brady B-483A, which holds UL 969 component recognition under File MH17154 / MH10939 (PGJI2) when printed with approved thermal transfer ribbons (such as Series R6000HF).
How do I generate an official engineering submittal package for A55-22-483?
Click the "1-Click Engineering Submittal PDF Package" button above to instantly generate a contractor-stamped specification packet with ASTM D1000 adhesion test data, continuous operating temperatures, and UL compliance certificates ready for architectural submittals.