Brady DR-125-2-YL-2 Diesel Resistant PermaSleeve Heat Shrink Wire and Cable Sleeves, 0.125" Dia x 1" W
Formulated from Brady B-7646 Irradiated polyolefin diesel resistant heat-shrinkable tubing (3:1 shrink ratio) with permanent acrylic adhesive. Engineered for 1" W × 0.235" H (Print: 0.08" H) industrial labeling applications.
Engineered Technical Features
- This roll has i75-series smart properties on the core that when used in the Brady i7500 printer in conjunction with i75-series smart ribbons, eliminates the need to adjust heat, speed, sensor location and mode, eliminates the need to calibrate out blank wasted labels, and warns the operator if a non-approved ribbon is used with this roll.
- If used in any other 3 inch core printer this roll will function as a manual roll
- A ribbon is required to print this material. Use Part Number R6600
Compatible Brady Printers & Thermal Transfer Ribbon Pairing
Verified hardware compatibility and recommended ribbon formulations for DR-125-2-YL-2.
Full Technical & Material Specifications (ASTM / UL Testing)
| Material Formulation: | Brady B-7646 (B-7646 Industrial Material) | Continuous Temp Range: | -40°F to 250°F (-40°C to 121°C) |
| Substrate Polymer Chemistry: | Irradiated polyolefin diesel resistant heat-shrinkable tubing (3:1 shrink ratio) | Total Material Thickness: | 0.004 in (0.102 mm) |
| Adhesive Formulation: | Permanent Acrylic | ASTM D1000 Stainless Steel Peel: | 50+ oz/in |
| ASTM D1000 Polypropylene Peel: | 35+ oz/in | ASTM D1000 Powder Coat Peel: | 40+ oz/in |
| UL 969 Recognition: | UL 969 (File MH17154 / MH10939) | CSA C22.2 Acceptance: | CSA C22.2 No. 0.15 |
| RoHS / Halogen Compliance: | RoHS Compliant • Standard Formulation | Surface Finish: | Gloss / Matte |
Related Sibling SKUs & Alternate Formats
Engineering & Specifier FAQs for DR-125-2-YL-2
Can I print Brady DR-125-2-YL-2 on a standard portable printer?
DR-125-2-YL-2 is a bulk roll engineered for benchtop printers (such as the i3300, i5100, i7100, and PR Plus series) with 3-inch core diameter holders.
Is Brady DR-125-2-YL-2 recognized under UL 969 for electrical panel rating plates?
Yes, DR-125-2-YL-2 is manufactured from Brady B-7646, which holds UL 969 component recognition under File MH17154 / MH10939 (PGJI2) when printed with approved thermal transfer ribbons (such as Series R6000HF).
How do I generate an official engineering submittal package for DR-125-2-YL-2?
Click the "1-Click Engineering Submittal PDF Package" button above to instantly generate a contractor-stamped specification packet with ASTM D1000 adhesion test data, continuous operating temperatures, and UL compliance certificates ready for architectural submittals.