Brady PS-C-125-WT PermaSleeve Heat Shrink Wire and Cable Continuous Labels
Formulated from Brady B-342 Irradiated polyolefin heat shrink tubing (3:1 shrink ratio) with permanent acrylic adhesive. Engineered for 1" W × 100 ft Roll industrial labeling applications.
Engineered Technical Features
- This roll has i75-series smart properties on the sideboard that when used in the Brady i7500 printer in conjunction with i75-series smart ribbons, eliminates the need to adjust heat, speed , sensor location and mode, eliminates the need to calibrate out blank wasted labels, and warns the operator if a non-approved ribbon is used with this roll.
- This narrow-width part is supplied on a 3 inch core with plastic sideboards attached to prevent material telescoping and to support i75-series smart tag placement.
- If used in any other 3 inch core printer this roll will function as a manual roll.
- A ribbon is required to print this material. Use Part Number IP-R6606 for the BradyPrinter i5100 or BRADY IP® Series Label Printer; use R6606 for a different printer
- This part is required to be externally fed into most thermal transfer printer models and will not physically mount inside the printer
- When used with BradyPrinter i5100 and BRADY IP® Series Label Printer this part will also operate in full manual mode and is not enabled with Brady PrintSmart chip technology
- For use with other printers, consult printer's specification for minimum media width and material type compatability, and test for intended use
Compatible Brady Printers & Thermal Transfer Ribbon Pairing
Verified hardware compatibility and recommended ribbon formulations for PS-C-125-WT.
Full Technical & Material Specifications (ASTM / UL Testing)
| Material Formulation: | Brady B-342 (B-342 Industrial Material) | Continuous Temp Range: | -40°F to 250°F (-40°C to 121°C) |
| Substrate Polymer Chemistry: | Irradiated polyolefin heat shrink tubing (3:1 shrink ratio) | Total Material Thickness: | 0.004 in (0.102 mm) |
| Adhesive Formulation: | Permanent Acrylic | ASTM D1000 Stainless Steel Peel: | 50+ oz/in |
| ASTM D1000 Polypropylene Peel: | 35+ oz/in | ASTM D1000 Powder Coat Peel: | 40+ oz/in |
| UL 969 Recognition: | UL 969 (File MH17154 / MH10939) | CSA C22.2 Acceptance: | CSA C22.2 No. 0.15 |
| RoHS / Halogen Compliance: | RoHS Compliant • Standard Formulation | Surface Finish: | Gloss / Matte |
Related Sibling SKUs & Alternate Formats
Engineering & Specifier FAQs for PS-C-125-WT
Can I print Brady PS-C-125-WT on a standard portable printer?
PS-C-125-WT is a bulk roll engineered for benchtop printers (such as the i3300, i5100, i7100, and PR Plus series) with 3-inch core diameter holders.
Is Brady PS-C-125-WT recognized under UL 969 for electrical panel rating plates?
Yes, PS-C-125-WT is manufactured from Brady B-342, which holds UL 969 component recognition under File MH17154 / MH10939 (PGJI2) when printed with approved thermal transfer ribbons (such as Series R6000HF).
How do I generate an official engineering submittal package for PS-C-125-WT?
Click the "1-Click Engineering Submittal PDF Package" button above to instantly generate a contractor-stamped specification packet with ASTM D1000 adhesion test data, continuous operating temperatures, and UL compliance certificates ready for architectural submittals.