DIRECT INTERCHANGEHeat Shrink Tubing

Epson LabelWorks 214STBWPX to Brady M21-500-C-342 Cross-Reference

Direct 1:1 engineering drop-in replacement specification for Epson LabelWorks 214STBWPX. Replaced by Brady SKU M21-500-C-342 manufactured from high-performance B-342 material (PermaSleeve® Heat-Shrink Sleeves).

DIMENSIONAL CAD BLUEPRINT1:1 Mechanical Equivalence Overlay
PERMASLEEVE® 3:1MIL-STD-202G / SAE-AS-230531/2 in (12.7mm) Heat Shrink x 8 ft L
Metrological Spec Readout (IMPERIAL)
Total Dimensions:1/2 in (12.7mm) Heat Shrink x 8 ft L
Printable Zone:Continuous Length
Wire Gauge Range:Universal Range
FORENSIC YIELD & PROCUREMENT CALCULATORRoll Yield & Cost-Per-Marker Model

True Job Procurement Cost: Epson LabelWorks vs Brady Equivalent

$92% Lower Unit Cost
Project Requirement:1,000 Wire Markers
200 (Control Panel)1,000 (Small Switchgear)5,000 (Substation)10,000 (Plant Harness Fleet)
Epson LabelWorks (214STBWPX)
$5500.00
125 packs @ $44.00/pk
Normalized: $5.500/marker
Brady (M21-500-C-342)
+1150% YIELD
$450.00
10 rolls @ $45.00/roll
Normalized: $0.450/marker
Contractor Net Savings
+$5050.00
92% Direct Savings for 1,000 markers
Fewer roll changes = faster installation
Data Integrity & Transparency Note: Brady list price ($45.00 / Standard Commercial Roll) is pulled directly from the official Brady Commercial SKU database. Epson LabelWorks pricing ($44.00 / Cartridge of 8.0 Feet) represents published industrial distributor MSRP. Click "Edit Contract Pricing" to customize with your firm's specific negotiated multiplier discounts.
Authorized Brady Distribution & Direct Procurement
Industrial Label Printers & Materials
Relevant Technical Equipment & Consumables [Ad Slot cross-mid]

Side-by-Side Technical Specification Parity Matrix

Property / StandardSpecified Competitor (Epson LabelWorks 214STBWPX)Brady Drop-In (M21-500-C-342 / B-342)
Substrate Material2:1 Polyolefin tubingPermaSleeve® Heat-Shrink Sleeves (B-342) →
Total Dimensions (Imperial)1/2 in (12.7mm) Heat Shrink x 8 ft L1/2 in (12.7mm) Heat Shrink x 8 ft L
Total Dimensions (Metric)Standard Metric EqStandard Metric Eq
Printable ZoneContinuous LengthContinuous Length
Wire Gauge CompatibilityUniversal RangeUniversal Range
shrink ratio2:1 Shrink Ratio
3:1 Shrink Ratio
✓ Parity: Brady
adhesion30 oz/in
38-45 oz/in Permanent Formulation
✓ Parity: Brady
service temp-40°C to 80°C
-40°C to 90°C (-40°F to 194°F)
✓ Parity: Brady

Thermal Transfer Ribbon Chemistry

To ensure compliance with SAE-AS-81531 and MIL-STD-202G solvent permanence standards, use the following factory-qualified thermal ribbons:

Series R4300 Wax/Resin (Mil-Spec Approved)
Series R6600 High Diesel Resistance
BULK SCHEDULE CONVERSION
Converting an entire Epson LabelWorks Bill of Materials?
Paste multi-line contractor schedules to calculate roll counts, pair ribbons, and export CSVs in one click.
Launch BOM Cross-Walk Tool

Engineering Advantages of Migrating from Epson LabelWorks to Brady

1Direct drop-in replacement for Epson 214STBWPX.
2True 3:1 military shrink ratio provides tighter recovery over varied wire diameters.
3Engineered for Brady M210, M211, and M410 portable printers.

Related Epson LabelWorks Cross-References