ASTM D1308 / D543 Chemical Test ReportFormula: Hydrocarbon Mixture (C10–C15 / C4–C12)
Diesel Fuel & Unleaded Gasoline Resistance: Brady Material Ratings
Generator fuel lines, heavy machinery engine bays, fleet fuel tanks, pipeline markers. This engineering guide provides empirical laboratory test ratings for 312 Brady materials evaluated against Diesel Fuel & Unleaded Gasoline for print permanence and adhesive adhesion.
Group
Fuels & Petrochemicals
Hazard
Combustible Hydrocarbons
Tested
312 Materials
Sponsored Diesel Fuel & Unleaded Gasoline Resistant Materials
Industrial Label Printers & Materials
Relevant Technical Equipment & Consumables [Ad Slot chem-diesel-fuel-and-gasoline]
Standard Laboratory Test Protocol
Brady chemical immersion testing follows strict standardized procedures:
- Immersion Cycles: 5 cycles consisting of 10-minute soaks in Diesel Fuel & Unleaded Gasoline followed by 30-minute recovery periods at 22°C (72°F).
- Rub Test: Following final immersion, printed legends are rubbed with a cotton swab saturated in Diesel Fuel & Unleaded Gasoline for 10–20 double rubs under ~1 lb of downward force.
- Adhesive Inspection: Evaluated for edge lift, adhesive softening, ooze, or dissolution from stainless steel panels.
Thermal Ribbon Chemistry Importance
Face stocks like polyester and polyimide resist Diesel Fuel & Unleaded Gasoline, but standard wax/resin ribbons will smear or dissolve instantly upon contact.
Required Formulation: Pure Resin (Series R6000HF / R6600)
Thermoset resin formulations crosslink under high printhead heat, creating a solvent-impermeable matrix that withstands aggressive wipe-downs.
Laboratory Test Results Table: Diesel Fuel & Unleaded Gasoline
Showing 312 tested materials ranked by solvent survivability score.
| B-Number | Survivability Rating | Substrate & Adhesive Effect | Required Ribbon | Operating Limits | Datasheet |
|---|---|---|---|---|---|
| B-1 Engraved Tags and Signs rigid laminate | Excellent (No Effect) | NE | Series R6000HF | -40.0°C to 90.0°C | Full Specs |
| B-101 Polycoated Tagstock Polycoated tagstock | Excellent (No Effect) | NE | Series R6000HF | -40.0°C to 70.0°C | Full Specs |
| B-1010 B-1010 Solid Epoxy | Excellent (No Effect) | Tested | Series R6000HF | Standard Industrial | Full Specs |
| B-117 B-117 TRANSLUCENT VINYL TAPE Translucent vinyl | Excellent (No Effect) | Tested | Series R6000HF | Standard Industrial | Full Specs |
| B-120 B-120 FIBERGLASS SIGNS Fiberglass reinforced polyester | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 90.0°C | Full Specs |
| B-128 Photoluminescent Conformable Tape Technical Substrate | Excellent (No Effect) | Tested | Series R6000HF | -29.0°C to 50.0°C | Full Specs |
| B-130 B-130 BRADYSTAKE MARKER Fiberglass reinforced polyester | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 70.0°C | Full Specs |
| B-140 BradyLam Signs Technical Substrate | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 80.0°C | Full Specs |
| B-181 B-181 DURAGUARD PROPERTY IDENTIFICATION TAGS Metallized film with a plastic overlaminate | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 145.0°C | Full Specs |
| B-184 Aluminum Foil Label Stock Dead Soft Aluminum Foil | Excellent (No Effect) | Tested | Series R6000HF | Standard Industrial | Full Specs |
| B-2 Property Identification Plates Technical Substrate | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 160.0°C | Full Specs |
| B-201 BradyB-201 PVC | Excellent (No Effect) | Tested | Series R6000HF | -40°C to 60 (A and B); 82 (C, D, F, G, and H)°C | Full Specs |
| B-23 B-23 anodized aluminum | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 149.0°C | Full Specs |
| B-2551 BradyB-2551 Technical Substrate | Excellent (No Effect) | Tested | Series R6000HF | Standard Industrial | Full Specs |
| B-2569 BradyB-2569 Polyester | Excellent (No Effect) | Tested | Series R6000HF | Standard Industrial | Full Specs |
| B-2581 BradyB-2581 Vinyl | Excellent (No Effect) | Tested | Series R6000HF | Standard Industrial | Full Specs |
| B-2595 BradyB-2595 Vinyl | Excellent (No Effect) | Tested | Series R6000HF | Standard Industrial | Full Specs |
| B-2618 Aqueous Inkjet Printable Matte White Polyester Label Stock White polyester | Excellent (No Effect) | 1 (No visible effect) | Series R6000HF | -40.0°C to 180.0°C | Full Specs |
| B-3 Floor Marking Tape vinyl | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 82.0°C | Full Specs |
| B-300 B-300 Technical Substrate | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 177.0°C | Full Specs |
| B-302 B-302 PRINTED POLYESTER LABEL Technical Substrate | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 110.0°C | Full Specs |
| B-309 High Intensity Prismatic Reflective Sheeting Technical Substrate | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 100.0°C | Full Specs |
| B-311 B-311 PORCELAIN SIGNS, TAGS, AND MARKERS porcelain enamel fused to stainless steel | Excellent (No Effect) | Tested | Series R6000HF | -45.0°C to 815.0°C | Full Specs |
| B-319 BradySleeve™ Marker Non-shrinkable, high density polyolefin film | Excellent (No Effect) | Total print removal | R5000 | -65.0°C to 130.0°C | Full Specs |
| B-320 B-320 BRADYLEX SIGNS Outdoor Lexan® bonded to fiberglass | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 80.0°C | Full Specs |
| B-324 B-324 glow in the dark (photoluminescent) film | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 50.0°C | Full Specs |
| B-330 B-330 BRADYWRAP MARKER Heat shrinkable polyolefin | Excellent (No Effect) | Tested | R4300 | -94.0°C to 230.0°C | Full Specs |
| B-337 B-337 Technical Substrate | Excellent (No Effect) | No Visible Effect | Series R6000HF | -40.0°C to 50.0°C | Full Specs |
| B-341 B-341 PermaSleeve Marker flexible polyolefin sleeves | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 260.0°C | Full Specs |
| B-347 B 347 BRADYGLO™ Safety Signs Technical Substrate | Excellent (No Effect) | Some Visible Effect | Series R6000HF | -40.0°C to 50.0°C | Full Specs |
| B-348 BRADYLSZHCABLEMARKER Lowsmoke, zerohalogentypepolyolefin | Excellent (No Effect) | Tested | Series R6000HF | Standard Industrial | Full Specs |
| B-351 B-351 Tamper- ResistantVinylFinish: MatteWhiteAdhesive: Acrylic | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 100.0°C | Full Specs |
| B-367 Custom Foot Printing Tamper-Evident Polypropylene Label Stock Polypropylene | Excellent (No Effect) | No visible effect | Series R6000HF | Standard Industrial | Full Specs |
| B-374 B-374 photoluminescent plastic | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 50.0°C | Full Specs |
| B-377 BradyGlo High Intensity plastic sign glow-in-the-dark (photoluminescent) plastic sign | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 50.0°C | Full Specs |
| B-382 BradyGuard Signs Polycarbonate bonded to fiberglass | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 80.0°C | Full Specs |
| B-387 BradyGlo™ High Intensity glow-in-the-dark (photoluminescent) plastic sign with protected graphics | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 50.0°C | Full Specs |
| B-390 B-390 Thermal Transfer Printable Wire Marking Insert & BRADY Wire Marking Carriers extruded, clear PVC | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 100.0°C | Full Specs |
| B-4 B-4 ANTI-SLIP REPOSITIONABLE FLOOR SIGNS surface printed vinyl overlaminated with transparent anti-slip vinyl | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 70.0°C | Full Specs |
| B-401 Plastic Safety Sign with Protected Graphics High impact polystyrene | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 80.0°C | Full Specs |
| B-418 B-418 PLASTIC UTILITY TAG Technical Substrate | Excellent (No Effect) | Tested | Series R6000HF | Standard Industrial | Full Specs |
| B-421 B-421 MATTE BLACK LASER MARKABLE POLYESTER LABEL STOCK Topcoated 2.0 mil polyester film | Excellent (No Effect) | Tested | Series R6000HF | Standard Industrial | Full Specs |
| B-434A B -434A THERMAL TRANSFER PRINTABLE GLOSS METALLIZED POLYESTER LABEL STOCK Metallized Polyester | Excellent (No Effect) | Tested | R4900 | Standard Industrial | Full Specs |
| B-435A B -435A THERMAL TRANSFER PRINTABLE GLOSS METALLIZED POLYESTER LABEL STOCK Metallized Polyester | Excellent (No Effect) | Tested | R4900 | Standard Industrial | Full Specs |
| B-442 B-442 TAMPER EVIDENT DURAGUARD® PROPERTY IDENTIFICATION TAGS Metalized film with a plastic overlaminate | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 145.0°C | Full Specs |
| B-450 B-450 POLYETHYLENE SIGNS Linear polyethylene sheet containing UV stabilizers | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 82.0°C | Full Specs |
| B-452 452 BRADYGLO™ Safety Signs Technical Substrate | Excellent (No Effect) | No Visible Effect | Series R6000HF | -40.0°C to 50.0°C | Full Specs |
| B-455 B-455 SURFACE PRINTED PVC SIGNS OVERLAMINATED WITH A CLEAR POLYESTER rigid PVC material overlaminated with a gloss clear polyester | Excellent (No Effect) | No visible effect | Series R6000HF | -40.0°C to 70.0°C | Full Specs |
| B-462 B-462 Technical Substrate | Excellent (No Effect) | Some Visible Effect | Series R6000HF | -40.0°C to 50.0°C | Full Specs |
| B-473 B-473 Thermal Transfer Printable Glossy White Static Dissipative Polyester Label Stock White Polyester | Excellent (No Effect) | Tested | R6000 Halogen Free | -40°C to 180.0°C | Full Specs |
| B-484A B-484AFLEXIBLETHERMALTRANSFERPRINTABLELABELSTOCK PolyesterFinish:GlosswhiteAdhesive:PermanentRubberBased | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 120.0°C | Full Specs |
| B-485 B-485 SELF-STICKING BIOHAZARD SIGN Technical Substrate | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 50.0°C | Full Specs |
| B-493 B-493 RIGID HIGH VISIBILITY SIGNS Plastic | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 90.0°C | Full Specs |
| B-499A Thermal Transfer / Dot Matrix Printable Nylon Cloth Label Polyamide coated nylon cloth, matte white finish, permanent acrylic adhesive | Excellent (No Effect) | Adhesive failure, label discoloration | R4300 | -40°C to 120°C | Full Specs |
| B-508 B-508 BRADYTAG® COMPUTER PRINTABLE TAG Nomex® Tag | Excellent (No Effect) | 1 | R4300 | -70.0°C to 130.0°C | Full Specs |
| B-509 B-509 MAGNETIC BACK POLYESTER Magnetic sheeting with a white polyester surface | Excellent (No Effect) | Tested | Series R6000HF | -18.0°C to 70.0°C | Full Specs |
| B-515 B-515 STATIC CLING VINYL Static cling vinyl | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 70.0°C | Full Specs |
| B-522 THERMAL TRANSFER PRINTABLE GLOSSY CLEAR POLYESTER LABEL STOCK Clear Polyester | Excellent (No Effect) | Tested | R6000 Halogen Free | Standard Industrial | Full Specs |
| B-523 B-523 Technical Substrate | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 50.0°C | Full Specs |
| B-526 B-526 Technical Substrate | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 60.0°C | Full Specs |
| B-529 B-529 POLYPROPYLENE PRESSURE SENSITIVE ADHESIVE FILM polypropylene film | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 100.0°C | Full Specs |
| B-530 B-530 TAMPER RESISTANT Destructable vinyl film | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 90.0°C | Full Specs |
| B-534 Floor Marking Signs surface printed polyester with a rigid, clear polyester overlaminate and selectively covered by an anti-skid tread | Excellent (No Effect) | Tested | Series R6000HF | -18.0°C to 54.0°C | Full Specs |
| B-541 B-541 TEFLON COATED ANODIZED ALUMINUM anodized aluminum, double coated teflon barcode tag | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 260.0°C | Full Specs |
| B-542 BradyGlo™ High Intensity aluminum sign glow-in-the-dark (photoluminescent) aluminum sign | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 50.0°C | Full Specs |
| B-543 Floor Marking Tape extruded polyvinyl chloride | Excellent (No Effect) | F | Series R6000HF | -18.0°C to 60.0°C | Full Specs |
| B-545 B-545 ALUMINUM SAFETY SIGN Coated aluminum | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 110.0°C | Full Specs |
| B-549 B-549 POLYESTER LABEL STOCK Olefin/polyester film | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 100.0°C | Full Specs |
| B-551 B-551 TAG STOCK polyester | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 90.0°C | Full Specs |
| B-552 BradyGlo™ High Intensity aluminum sign with protected graphics glow-in-the-dark (photoluminescent) aluminum sign with protected graphics | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 50.0°C | Full Specs |
| B-555 Aluminum Safety Sign with Protected Graphics Coated aluminum | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 110.0°C | Full Specs |
| B-558 Eco-Friendly Pressure Sensitive Signs Pressure sensitive sign material with 20% pre-consumer waste | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 110.0°C | Full Specs |
| B-563 B-563 High Density Polypropylene | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 85.0°C | Full Specs |
| B-564 564 BradyGlo™ High Intensity Anti Slip Floor Material glow-in-the-dark anti slip egress marker | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 50.0°C | Full Specs |
| B-565 B-565 METALLIZED POLYESTER TAPE Technical Substrate | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 110.0°C | Full Specs |
| B-569 B-569 HIGH PERFORMANCE POLYESTER TAPE Technical Substrate | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 100.0°C | Full Specs |
| B-581 B-581 REPOSITIONABLE VINYL Vinyl film | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 82.0°C | Full Specs |
| B-582 B-582 BRADYGLO(TM) SELF-STICKING POLYESTER photoluminescent pressure sensitive polyester | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 80.0°C | Full Specs |
| B-584 B-584 REFLECTIVE TAPE Technical Substrate | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 70.0°C | Full Specs |
| B-585 BradyB-585 Technical Substrate | Excellent (No Effect) | Tested | Series R6000HF | Standard Industrial | Full Specs |
| B-586 B-586 Paper Board | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 80.0°C | Full Specs |
| B-593 Raised Panel Label Polyester, gloss finish, with permanent acrylic, foam backed adhesive | Excellent (No Effect) | 1 | R4400 | -20°C to 100°C | Full Specs |
| B-595 Vinyl Film with Permanent Adhesive Vinyl film with a permanent acrylic pressure sensitive adhesive | Excellent (No Effect) | NE | Series R6000HF | -40°C to 82°C | Full Specs |
| B-618 B -618 THERMAL TRANSFER PRINTABLE MATTE WHITE POLYESTER LABEL STOCK White polyester | Excellent (No Effect) | Tested | R4900 | -40°C to 180.0°C | Full Specs |
| B-619A Matte White Polyester Label Stock White Polyester | Excellent (No Effect) | Tested | Series R6000HF | Standard Industrial | Full Specs |
| B-634 Clear Polyester Laminating Tape Clear Polyester (3 mil film) | Excellent (No Effect) | Tested | Series R6000HF | -18.0°C to 54.0°C | Full Specs |
| B-640 BradyGlo™ B-640 Stair Noising Technical Substrate | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 80.0°C | Full Specs |
| B-645 BradyGlo(TM) Door Handle Marker Phosphorescent Polyester Film | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 80.0°C | Full Specs |
| B-674 B-674 POLYESTER OVERLAMINATE polyester film | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 90.0°C | Full Specs |
| B-681 B-681 Polyester film with a polyester overlaminate | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 110.0°C | Full Specs |
| B-689 B-689 HIGH PERFORMANCE COILED PIPEMARKER Technical Substrate | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 120.0°C | Full Specs |
| B-702 B-702 FLEXIBLE FILM TAPE flexible film tape | Excellent (No Effect) | Tested | Series R6000HF | Standard Industrial | Full Specs |
| B-711 ONE STEP PROTECT™ BACKSIDE PRINTED CLEAR POLYESTER LABEL WITH CLEAR BORDER Polyester | Excellent (No Effect) | Tested | R4400 | -80°C to 100.0°C | Full Specs |
| B-712 ONE STEP PROTECT™ BACKSIDE PRINTED CLEAR POLYESTER LABEL WITH WHITE BORDER Polyester | Excellent (No Effect) | Tested | R4400 | -80°C to 100.0°C | Full Specs |
| B-720 B -720 IDENTOLINE® UNDERGROUND WARNING TAPE printed plastic tape | Excellent (No Effect) | Tested | Series R6000HF | Standard Industrial | Full Specs |
| B-721 B-721 DETECTABLE IDENTOLINE® UNDERGROUND LINE WARNING TAPE Technical Substrate | Excellent (No Effect) | Tested | Series R6000HF | Standard Industrial | Full Specs |
| B-725 B-725 COLORED VINYL LABEL STOCK Vinyl | Excellent (No Effect) | Tested | Series R6000HF | Standard Industrial | Full Specs |
| B-726 B-726 AISLE MARKING TAPE vinyl | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 80.0°C | Full Specs |
| B-7316 B-7316 316stainlesssteelFinish:Gloss | Excellent (No Effect) | No Visible Effect (NVE) | Series R6000HF | Standard Industrial | Full Specs |
| B-7351 B-7351 Tamper- ResistantVinylFinish:SatinAdhesive:Acrylic | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 100.0°C | Full Specs |
| B-736 B-736 ECONOMY PIPE MARKERS ON A ROLL Plastic film | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 100.0°C | Full Specs |
| B-745 B-745 LASER PRINTABLE VINYL vinyl film | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 82.0°C | Full Specs |
| B-7505 B-7505 PolycarbonateFinish:VelvetAdhesive:Permanentacrylicadhesive | Excellent (No Effect) | NVE | Series R6000HF | Standard Industrial | Full Specs |
| B-7506 B-7506 PolycarbonateFinish:VelvetAdhesive:Permanentacrylicadhesive | Excellent (No Effect) | Tested | Series R6000HF | -10.0°C to 60.0°C | Full Specs |
| B-7514 THERMAL TRANSFER PRINTABLE GLOSSY WHITE POLYESTER LABEL STOCK WITH A HIGH STRENGTH PERMANENT ADHESIVE Polyester | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 150.0°C | Full Specs |
| B-752 B-752 CONSPICUITY REFLECTIVE TAPE diamond grade reflective sheeting | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 93.0°C | Full Specs |
| B-7524 B-7524 aluminium | Excellent (No Effect) | N.V.E. | Series R6000HF | -40.0°C to 110.0°C | Full Specs |
| B-7529P B-7529P Technical Substrate | Excellent (No Effect) | Tested | Series R6000HF | Standard Industrial | Full Specs |
| B-7538 B-7538 Technical Substrate | Excellent (No Effect) | Tested | Series R6000HF | Standard Industrial | Full Specs |
| B-7541P B-7541P Technical Substrate | Excellent (No Effect) | Tested | Series R6000HF | Standard Industrial | Full Specs |
| B-7543P B-7543P Technical Substrate | Excellent (No Effect) | Tested | Series R6000HF | Standard Industrial | Full Specs |
| B-7552 Thermal Transfer Printable Glossy Clear Polyester Label Stock Clear polyester | Excellent (No Effect) | Tested | Series R6000HF | -80.0°C to 145.0°C | Full Specs |
| B-7569 B-7569 Technical Substrate | Excellent (No Effect) | Failed | Series R6000HF | Standard Industrial | Full Specs |
| B-7570 B-7570 Technical Substrate | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 65.0°C | Full Specs |
| B-7591 B-7591 VINYL FILM WITH PERMANENT ADHESIVE vinyl | Excellent (No Effect) | Print gone. Edge lifting | Series R6000HF | Standard Industrial | Full Specs |
| B-7597 B-7597 polyethylene | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 100.0°C | Full Specs |
| B-7598 B-7598 RigidpolyestertagFinish:GlossyColours:Availableinwhite,black,yellow,red,green,blueandmetalized | Excellent (No Effect) | Tested | Series R6000HF | Standard Industrial | Full Specs |
| B-7599 B-7599 polyethylene tag | Excellent (No Effect) | Tested | Series R6000HF | Standard Industrial | Full Specs |
| B-7641 PermaSleeve TM Marker Heatshrinktubing(2:1),lowsmokezerohalogen,flameretardant,polyolefinsleeves | Excellent (No Effect) | 5 | Series R6000HF | -55.0°C to 105.0°C | Full Specs |
| B-7642 PermaSleeve® Marker Heat shrinkable (2:1) polyolefin sleeves | Excellent (No Effect) | 1 | R4300 | -55°C to 240°C | Full Specs |
| B-7643 B-7643 ZERO HALOGEN CABLE MARKERS thermoplastic polyether polyurethane | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 90.0°C | Full Specs |
| B-7658 B-7658 Technical Substrate | Excellent (No Effect) | Tested | Series R6000HF | Standard Industrial | Full Specs |
| B-7659 B-7659 surface printed white aluminium composite material over-laminated with a UV Light blocking clear polyester film | Excellent (No Effect) | Tested | Series R6000HF | Standard Industrial | Full Specs |
| B-7664 BRADYB-7664GLOSSWHITEPOLYESTERFORINKJETPRINTING WhitePolyesterFinish:GlossAdhesive:PermanentAcrylic | Excellent (No Effect) | Tested | Series R6000HF | Standard Industrial | Full Specs |
| B-7665 BRADYB-7665 MetallizedPolyesterFinish:HighGlossAdhesive:PermanentAcrylic | Excellent (No Effect) | Tested | Series R6000HF | Standard Industrial | Full Specs |
| B-7666 BRADYB-7666 Clear Polypropylene | Excellent (No Effect) | Tested | Series R6000HF | Standard Industrial | Full Specs |
| B-7667 B-7667 Technical Substrate | Excellent (No Effect) | Tested | Series R6000HF | Standard Industrial | Full Specs |
| B-7692 DOUBLE SIDED SURFACE PRINTED POLYPROPYLENE TAG White polypropylene | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 70.0°C | Full Specs |
| B-773B B-773BLASERPRINTABLEMETALLIZEDPOLYESTERLABELSTOCK MetallizedPolyesterFinish:MatteAdhesive:PermanentAcrylic | Excellent (No Effect) | Tested | Series R6000HF | Standard Industrial | Full Specs |
| B-799 B-799 LASER PRINTABLE NYLON CLOTH LABEL polyamide coated nylon cloth | Excellent (No Effect) | Tested | Series R6000HF | Standard Industrial | Full Specs |
| B-808 B-808 photoluminescent film construction | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 50.0°C | Full Specs |
| B-811 B-811 MAGNETIC SIGNS Magnetic sheeting with a white vinyl surface | Excellent (No Effect) | Tested | Series R6000HF | -18.0°C to 70.0°C | Full Specs |
| B-8117 MATTE BLACK LABEL STOCK Polyester | Excellent (No Effect) | Tested | R6800 | Standard Industrial | Full Specs |
| B-817 B-817 Low halogen plastic | Excellent (No Effect) | Tested | Series R6000HF | -40°C to 60 (Size A and B); 77 (Size C, D, E, F, G, and H)°C | Full Specs |
| B-819 B-819 ANTI SKID-PROOF FLOOR GRAPHICS surface printed vinyl with a velvet embossed rigid clear vinyl overlaminated | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 70.0°C | Full Specs |
| B-825 B-825 POLYOLEFIN TAGS Polyolefin | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 70.0°C | Full Specs |
| B-826 B-826 VINYL FILM vinyl film | Excellent (No Effect) | Tested | Series R6000HF | -46.0°C to 93.0°C | Full Specs |
| B-836 B-836 Fluted Polypropylene Temporary Safety Signs Fluted, extruded polypropylene sheet | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 54.0°C | Full Specs |
| B-837 B-837 HEAVY DUTY ENCAPSULATED TAGS printed paper sealed in a write on matte finish polyester pouch with a 3/8" grommet | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 80.0°C | Full Specs |
| B-841 B-841 INKJET/LASER/DOT MATRIX PRINTABLE FILM polyester film | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 90.0°C | Full Specs |
| B-842 B-842 BALL VALVE LOCKOUT DEVICE Fiberglass reinforced nylon | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 120.0°C | Full Specs |
| B-8459 B -8459 THERMAL TRANSFER PRINTABLE MATTE WHITE POLYESTER LABEL STOCK White polyester | Excellent (No Effect) | No visible effect | R4900 | Standard Industrial | Full Specs |
| B-851 B-851 ECONOMY POLYESTER TAGS Heavy duty polyester | Excellent (No Effect) | Tested | Series R6000HF | Standard Industrial | Full Specs |
| B-8591 WEATHER RESISTANT LABEL STOCK PolyesterFinish:GlossAdhesive:Permanent acrylic | Excellent (No Effect) | Tested | R122 | -70°C to 110.0°C | Full Specs |
| B-870 B-870 SHADOW BOARD PETG | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 60.0°C | Full Specs |
| B-874 B-874 Scafftag® Insert Plastic Tag Stock | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 60.0°C | Full Specs |
| B-883 B-883 HIGH PERFORMANCE / HIGH VISIBILITY LABEL CARRIER Fiberglass reinforced plastic | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 120.0°C | Full Specs |
| B-893 Clip Assembly Glass filled nylon with 316 Type Stainless Steel Spring | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 120.0°C | Full Specs |
| B-895 B-895 DIAMOND GRADE™ FLUORESCENT LDP REFLECTIVE TRAFFIC SIGN Diamond grade™ reflective sheeting on aluminum | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 100.0°C | Full Specs |
| B-910 B-910 AcrylicFinish:GlossAdhesive:PermanentAcrylic | Excellent (No Effect) | Completeremovalofoverlaminate | Series R6000HF | Standard Industrial | Full Specs |
| B-916 B-916 ANTI-SKID TAPE Technical Substrate | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 70.0°C | Full Specs |
| B-918 B-918 PHOTOLUMINESCENT ANTI-SKID TAPE Technical Substrate | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 90.0°C | Full Specs |
| B-919 B-919 Stainless Steel Valve Tag Stainless Steel | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 816.0°C | Full Specs |
| B-920 Solar Labels Vinyl film with acrylic overlaminate | Excellent (No Effect) | Tested | Series R6000HF | -29.0°C to 82.0°C | Full Specs |
| B-921 Reflective Solar Labels ASTM D 4956 Type 1 Reflective Sheeting with clear acrylic overlaminate | Excellent (No Effect) | Tested | Series R6000HF | -29.0°C to 82.0°C | Full Specs |
| B-927 B-927 TAMPER RESISTANT TAPE Technical Substrate | Excellent (No Effect) | Tested | Series R6000HF | -34.0°C to 121.0°C | Full Specs |
| B-928 B-928 VINYL LABEL STOCK WITH COLD TEMPERATURE APPLICATION ADHESIVE flexible vinyl film | Excellent (No Effect) | Tested | Series R6000HF | Standard Industrial | Full Specs |
| B-933 B-933 VINYL flexible film | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 93.0°C | Full Specs |
| B-946 B-946 Vinyl film | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 82.0°C | Full Specs |
| B-949 High Intensity Reflective Traffic Signs High Intensity reflective sheeting on aluminum | Excellent (No Effect) | No Visible Effect | Series R6000HF | -40.0°C to 100.0°C | Full Specs |
| B-950 High Performance Vinyl Marking Tape Encapsulated vinyl | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 80.0°C | Full Specs |
| B-955 Reflective Traffic Signs Engineering Grade Reflective sheeting applied to aluminum | Excellent (No Effect) | No Visible Effect | Series R6000HF | -40.0°C to 80.0°C | Full Specs |
| B-957 B-957 REFLECTIVE SHEETING Acrylic retroreflective sheeting | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 70.0°C | Full Specs |
| B-959 959 High Intensity Reflective Traffic Sign with Protected Graphics High intensity reflective sheeting on aluminum | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 100.0°C | Full Specs |
| B-961 Vinyl Banner Products Vinyl coated banner stock | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 70.0°C | Full Specs |
| B-965 B-965 REFLECTIVE TRAFFIC SIGN WITH PROTECTED GRAPHICS Engineering grade reflective sheeting applied to aluminum with protected graphics | Excellent (No Effect) | No Visible Effect | Series R6000HF | -40.0°C to 80.0°C | Full Specs |
| B-969B Matte Metallized Polyester Label Stock Metallized polyester | Excellent (No Effect) | Tested | Series R6000HF | Standard Industrial | Full Specs |
| B-981 B-981 photoluminescent polyester film | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 80.0°C | Full Specs |
| B-982 BradyGlo High Intensity Anti-Slip Floor Material photoluminescent pressure sensitive adhesive coated anti-slip egress marker | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 60.0°C | Full Specs |
| B-984 B-984 Technical Substrate | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 80.0°C | Full Specs |
| B-985 B-985 Photoluminescent polyester film on polystyrene | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 80.0°C | Full Specs |
| B-986 B-986 Photoluminescent polyester film on aluminum | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 80.0°C | Full Specs |
| B-9902 B-9902 Technical Substrate | Excellent (No Effect) | Tested | Series R6000HF | Standard Industrial | Full Specs |
| B-995 995 Diamond Grade™ Fluorescent LDP Reflective Traffic Signs with Protected Graphics Diamond grade ™ reflective sheeting on aluminum | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 100.0°C | Full Specs |
| B-996 B-996 PolyesterFinish:GlossAdhesive:Permanentacrylic | Excellent (No Effect) | Tested | Series R6000HF | Standard Industrial | Full Specs |
| B-997 B-997 BRADYLITE® REFLECTIVE SHEETING Technical Substrate | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 93.0°C | Full Specs |
| LOTO-1 Miniature Circuit Breaker Lockout - Pin Out Standard Glass-filled nylon | Excellent (No Effect) | 25°C | Series R6000HF | -20.0°C to 120.0°C | Full Specs |
| LOTO-10 Aluminum Padlocks Aluminum lock body and shackle | Excellent (No Effect) | 15 – 30°C | Series R6000HF | -20.0°C to 175.0°C | Full Specs |
| LOTO-100 SafeKey Compact Nylon Padlocks Glass-reinforced nylon lock body, Polymer plastic shackle | Excellent (No Effect) | 25 | Series R6000HF | -26.0°C to 121.0°C | Full Specs |
| LOTO-101 SafeKey Nylon Padlocks Glass-reinforced nylon lock body, Steel and optional polymer plastic shackle | Excellent (No Effect) | 25 | Series R6000HF | -26.0°C to 121.0°C | Full Specs |
| LOTO-102 BatteryBlock™ Battery Cable Lockout – Commercial Vehicle Acrylonitrile butadiene styrene (ABS) | Excellent (No Effect) | 25°C | Series R6000HF | -40.0°C to 100.0°C | Full Specs |
| LOTO-103 BatteryBlock™ Power Connector Lockout – Forklift Acrylonitrile butadiene styrene (ABS) | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 100.0°C | Full Specs |
| LOTO-104 - Solid Lockable Covers PVC Coated Polyester (PET) | Excellent (No Effect) | Tested | Series R6000HF | -20.0°C to 70.0°C | Full Specs |
| LOTO-105 - Ventilated Lockable Covers PVC Coated Polyester (PET) and Flame-Retardant Polyester Mesh | Excellent (No Effect) | Tested | Series R6000HF | -20.0°C to 70.0°C | Full Specs |
| LOTO-106 – Elastic Non-Lockable Covers Red Mesh: Flame-Retardant Polyester Mesh, Elastic: SPANDEX / ELASTANE FIBER | Excellent (No Effect) | Tested | Series R6000HF | -20.0°C to 70.0°C | Full Specs |
| LOTO-107 – Magnetic Non-Lockable Covers Technical Substrate | Excellent (No Effect) | Tested | Series R6000HF | -20.0°C to 70.0°C | Full Specs |
| LOTO-108 – Red Mesh Lockable Covers PVC Coated Polyester (PET) and Flame-Retardant Polyester Mesh | Excellent (No Effect) | Tested | Series R6000HF | -20.0°C to 70.0°C | Full Specs |
| LOTO-109 – Tower Skirt Cover Set Lockable Covers Technical Substrate | Excellent (No Effect) | Tested | Series R6000HF | -20.0°C to 70.0°C | Full Specs |
| LOTO-11 Key Retaining Steel Padlocks laminated steel plates, hardened steel | Excellent (No Effect) | 15 – 30°C | Series R6000HF | -55.0°C to 100.0°C | Full Specs |
| LOTO-110 – Tower Skirt Cover Lockable Covers Technical Substrate | Excellent (No Effect) | Tested | Series R6000HF | -20.0°C to 70.0°C | Full Specs |
| LOTO-111 – Ratchet Straps Lockable Polypropylene Web (Polyolefin) | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 130.0°C | Full Specs |
| LOTO-112 Pull Handle Butterfly Valve Lockout Acrylonitrile butadiene styrene (ABS) | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 100.0°C | Full Specs |
| LOTO-12 Steel Padlocks laminated steel plates, hardened steel shackle | Excellent (No Effect) | Tested | Series R6000HF | -55.0°C to 100.0°C | Full Specs |
| LOTO-13 Brass Padlock Solid brass body and shackle | Excellent (No Effect) | 15 – 30°C | Series R6000HF | Standard Industrial | Full Specs |
| LOTO-14 Clamp On 120v Circuit Breaker Lockout Polypropylene and impact modified nylon | Excellent (No Effect) | 25°C | Series R6000HF | -20.0°C to 80.0°C | Full Specs |
| LOTO-15 Snap On 120v Circuit Breaker Lockout Nylon 66 (Body), Stainless Steel (Dowel pin) | Excellent (No Effect) | Tested | Series R6000HF | -20.0°C to 120.0°C | Full Specs |
| LOTO-16 Prinzing 'No Hole' Breaker Lockout Polycarbonate plastic, Steel screw | Excellent (No Effect) | 25°C | Series R6000HF | -30.0°C to 122.0°C | Full Specs |
| LOTO-17 Clamp On Breaker Lockout Cleat Attachments Polypropylene | Excellent (No Effect) | Tested | Series R6000HF | -20.0°C to 80.0°C | Full Specs |
| LOTO-18 Portable Metal Group Lock Box Mild Sheet Steel, Powder-coated | Excellent (No Effect) | 25 | Series R6000HF | -20.0°C to 175.0°C | Full Specs |
| LOTO-19 Combined Lock Storage and Group Lockout Box Heavy Duty Steel, Powder Coat (Red), Lexan Window | Excellent (No Effect) | 25°C | Series R6000HF | -55.0°C to 177.0°C | Full Specs |
| LOTO-2 Clamp On 480v Circuit Breaker Lockout Polypropylene Outer Housing, Steel Clamp over molded Glass-filled Nylon, Steel screw with over molded Glass-filled Nylon thumbscrew | Excellent (No Effect) | 25°C | Series R6000HF | Standard Industrial | Full Specs |
| LOTO-20 Portable Plastic Group Lockout Box Isoplast polymers, Glass filled nylon, Polycarbonate | Excellent (No Effect) | 25°C | Series R6000HF | Standard Industrial | Full Specs |
| LOTO-21 Prinzing Portable / Wall Group Lockout Box Mild Sheet Steel, Powder Coat (Yellow), Lexan Window | Excellent (No Effect) | <25 | Series R6000HF | -55.0°C to 177.0°C | Full Specs |
| LOTO-22 Prinzing Ball Valve Lockout polypropylene | Excellent (No Effect) | 25°C | Series R6000HF | -20.0°C to 80.0°C | Full Specs |
| LOTO-23 Ball Valve Lockout Polyamide (Nylon 6/6); Steel | Excellent (No Effect) | Tested | Series R6000HF | Standard Industrial | Full Specs |
| LOTO-24 Universal Valve Lockout Technical Substrate | Excellent (No Effect) | Tested | Series R6000HF | -20.0°C to 120.0°C | Full Specs |
| LOTO-25 Miniature Circuit Breaker Lockout - Pin In Standard Glass-filled nylon | Excellent (No Effect) | 25°C | Series R6000HF | -20.0°C to 120.0°C | Full Specs |
| LOTO-26 Miniature Circuit Breaker Lockout - Pin Out Wide Glass-filled nylon | Excellent (No Effect) | 25°C | Series R6000HF | -20.0°C to 120.0°C | Full Specs |
| LOTO-27 Miniature Circuit Breaker Lockout Tie Bar Lockout Glass reinforced nylon, Brass, Stainless steel | Excellent (No Effect) | 25°C | Series R6000HF | -20.0°C to 120.0°C | Full Specs |
| LOTO-28 Electrical Plug Lockout Polypropylene, Stainless steel rivet | Excellent (No Effect) | 25°C | Series R6000HF | -20.0°C to 80.0°C | Full Specs |
| LOTO-29 Large 220/500V Plug Lockout Polypropylene | Excellent (No Effect) | <120°C | Series R6000HF | -20.0°C to 80.0°C | Full Specs |
| LOTO-3 All Purpose Cable Lockout Glass-filled Polyurethane polymer, Glass-filled nylon 6/6, Stainless Steel | Excellent (No Effect) | 25°C | Series R6000HF | -40.0°C to 120.0°C | Full Specs |
| LOTO-30 Prinzing Small Electrical Plug Lockout High Impact Polystyrene | Excellent (No Effect) | Tested | Series R6000HF | -20.0°C to 80.0°C | Full Specs |
| LOTO-31 Prinzing Yellow Electrical Plug Lockout High density polyethylene | Excellent (No Effect) | 25°C | Series R6000HF | -20.0°C to 80.0°C | Full Specs |
| LOTO-32 Prinzing Electrical/Pneumatic Plug Lockout High Impact Polystyrene | Excellent (No Effect) | 25°C | Series R6000HF | -20.0°C to 80.0°C | Full Specs |
| LOTO-33 Prinzing Multi-Pole Breaker Lockout Utility Grade ABS | Excellent (No Effect) | 25°C | Series R6000HF | -20.0°C to 75.0°C | Full Specs |
| LOTO-34 Aluminum Labeled Group Lockout Hasps Anodized Aluminum alloy | Excellent (No Effect) | 25°C | Series R6000HF | -30.0°C to 175.0°C | Full Specs |
| LOTO-35 Non-Conductive Nylon Group Lockout Hasp Nylon | Excellent (No Effect) | 25°C | Series R6000HF | Standard Industrial | Full Specs |
| LOTO-36 Prinzing Non-Conductive Group Lockout Hasp Xenoy resin | Excellent (No Effect) | 25°C | Series R6000HF | Standard Industrial | Full Specs |
| LOTO-37 Original Cable Lockout Technical Substrate | Excellent (No Effect) | 25°C | Series R6000HF | -20.0°C to 120.0°C | Full Specs |
| LOTO-38 Mini Cable Lockout Glass-filled nylon | Excellent (No Effect) | 25°C | Series R6000HF | -20.0°C to 120.0°C | Full Specs |
| LOTO-39 Oversized Clamp-On Breaker Lockout Polypropylene; Glass filled nylon; Stainless Steel | Excellent (No Effect) | Tested | Series R6000HF | Standard Industrial | Full Specs |
| LOTO-4 Universal Multi-Pole Breaker Lockout Glass-filled Nylon and Stainless Steel | Excellent (No Effect) | 25°C | Series R6000HF | -20.0°C to 120.0°C | Full Specs |
| LOTO-40 Three-Phase Breaker Lockout Polycarbonate plastic, Steel screw | Excellent (No Effect) | 25°C | Series R6000HF | Standard Industrial | Full Specs |
| LOTO-41 Prinzing Economy Cable Lockout glass-filled Polypropylene, Stainless steel, Plastic coated steel cable | Excellent (No Effect) | Tested | Series R6000HF | -20.0°C to 80.0°C | Full Specs |
| LOTO-42 Wall Switch Lockout Polypropylene | Excellent (No Effect) | 25°C | Series R6000HF | -20.0°C to 80.0°C | Full Specs |
| LOTO-43 Prinzing Wall Switch Lockout Polycarbonate | Excellent (No Effect) | 25°C | Series R6000HF | -40.0°C to 120.0°C | Full Specs |
| LOTO-44 Panel Loc 480/600V Breaker Blocker Glass-filled nylon | Excellent (No Effect) | 25°C | Series R6000HF | -20.0°C to 120.0°C | Full Specs |
| LOTO-45 LOTO-45 Technical Substrate | Excellent (No Effect) | 25°C | Series R6000HF | -40.0°C to 120.0°C | Full Specs |
| LOTO-46 Panel Snap-On Lockout Glass filled polyurethane, Glass-filled Nylon, Stainless steel, Copper, Aluminum | Excellent (No Effect) | 25°C | Series R6000HF | -40.0°C to 120.0°C | Full Specs |
| LOTO-47 Pneumatic Quick Disconnect Lockout Glass-filled Nylon | Excellent (No Effect) | 25°C | Series R6000HF | -20.0°C to 120.0°C | Full Specs |
| LOTO-48 Air Line Regulator Lockout Technical Substrate | Excellent (No Effect) | 25°C | Series R6000HF | -20.0°C to 120.0°C | Full Specs |
| LOTO-49 Fuse Blockout Devices ABS (Color: Red) | Excellent (No Effect) | 25°C | Series R6000HF | -25.0°C to 60.0°C | Full Specs |
| LOTO-5 Small 110V Plug Lockout Polypropylene | Excellent (No Effect) | 25°C | Series R6000HF | -20.0°C to 80.0°C | Full Specs |
| LOTO-50 Fuse Lockout Devices ABS (Color: Red) | Excellent (No Effect) | Tested | Series R6000HF | -25.0°C to 60.0°C | Full Specs |
| LOTO-51 Prinzing Gas Cylinder Lockout Polypropylene, Stainless steel | Excellent (No Effect) | 25°C | Series R6000HF | -20.0°C to 80.0°C | Full Specs |
| LOTO-52 Plug Valve Lockout Polypropylene, Steel | Excellent (No Effect) | Gasoline (normal & premium grade) (chemical); 85 (resistance) | Series R6000HF | -20.0°C to 80.0°C | Full Specs |
| LOTO-53 Safe-T-Grip Fuse Puller Glass Filled Polypropylene, Steel Rivet | Excellent (No Effect) | Tested | Series R6000HF | Standard Industrial | Full Specs |
| LOTO-54 Fuse Puller with Testlite Glass Filled Polypropylene, Steel Rivet | Excellent (No Effect) | 25°C | Series R6000HF | -30.0°C to 120.0°C | Full Specs |
| LOTO-55 Safe-T-Grip Fuse Puller Small Glass Filled Polypropylene, Steel Rivet | Excellent (No Effect) | 25°C | Series R6000HF | Standard Industrial | Full Specs |
| LOTO-56 Snap Cap Gas Cylinder Lockout Steel with Powder coating | Excellent (No Effect) | 25°C | Series R6000HF | Standard Industrial | Full Specs |
| LOTO-57 Push Button Safety Cover - NEMA 30.5 mm Clear Lexan and Adhesive Foam with removable protective layer | Excellent (No Effect) | Tested | Series R6000HF | Standard Industrial | Full Specs |
| LOTO-58 Push Button Safety Cover - IEC 22.5 mm Clear Lexan cover, metal hinge and base, adhesive film with protective layer | Excellent (No Effect) | 25°C | Series R6000HF | -30.0°C to 135.0°C | Full Specs |
| LOTO-59 Emergency Stop Safety Covers Steel with rust proof plating, Adhesive Film with removable protective layer | Excellent (No Effect) | 25°C | Series R6000HF | Standard Industrial | Full Specs |
| LOTO-6 Safety Padlock – Plastic Shackle Polyamide Nylon 66 | Excellent (No Effect) | Tested | Series R6000HF | -20.0°C to 120.0°C | Full Specs |
| LOTO-60 Emergency Stop Safety Covers - IEC 22.5 mm Steel with rust proof plating, Adhesive Film with removable protective layer | Excellent (No Effect) | 25°C | Series R6000HF | Standard Industrial | Full Specs |
| LOTO-61 Stopower Plug Lockouts Technical Substrate | Excellent (No Effect) | 25°C | Series R6000HF | -25.0°C to 60.0°C | Full Specs |
| LOTO-62 Hubbell Plugout Polypropylene | Excellent (No Effect) | Tested | Series R6000HF | -20.0°C to 80.0°C | Full Specs |
| LOTO-63 Steel Group Lockout Hasps Technical Substrate | Excellent (No Effect) | Tested | Series R6000HF | Standard Industrial | Full Specs |
| LOTO-64 Steel Group Lockout Hasps with Tabs Steel Hardened with Rust Proof Plating, Vinyl Coating: Red | Excellent (No Effect) | <25°C | Series R6000HF | Standard Industrial | Full Specs |
| LOTO-65 Aluminum Economy Group Lockout Hasps Aluminum, Powder Coat Red, Stainless Steel Rivet | Excellent (No Effect) | 25°C | Series R6000HF | Standard Industrial | Full Specs |
| LOTO-66 Corrosion-Resistant Group Lockout Hasps Technical Substrate | Excellent (No Effect) | 25°C | Series R6000HF | Standard Industrial | Full Specs |
| LOTO-67 Dual Sided Hasp Steel, Powder Coat (Red), Stainless Steel Rivet | Excellent (No Effect) | 25°C | Series R6000HF | Standard Industrial | Full Specs |
| LOTO-68 Group Lockout Hasps Steel with Rust Proof Plating, Vinyl label with adhesive film, Stainless Steel rivet | Excellent (No Effect) | 25°C | Series R6000HF | Standard Industrial | Full Specs |
| LOTO-69 Heavy Duty Steel Hasp Technical Substrate | Excellent (No Effect) | Tested | Series R6000HF | -35.0°C to 177.0°C | Full Specs |
| LOTO-7 Gate Valve Lockouts Polypropylene (housing), Steel (rivet, washers) | Excellent (No Effect) | 25°C | Series R6000HF | -40.0°C to 150.0°C | Full Specs |
| LOTO-70 Adjustable Gate Valve Lockouts Polypropylene | Excellent (No Effect) | 25°C, <120°C | Series R6000HF | -20.0°C to 80.0°C | Full Specs |
| LOTO-71 Butterfly Valve Lockout Device Modified Nylon 6/6, Brass Rivets, Stainless Steel Threaded Rod, Nut, and Plate | Excellent (No Effect) | Tested | Series R6000HF | Standard Industrial | Full Specs |
| LOTO-72 Push Button and Emergency Stop Safety Cover Device polycarbonate, stainless steel | Excellent (No Effect) | 48°C | Series R6000HF | -20.0°C to 80.0°C | Full Specs |
| LOTO-73 Safety Padlock - Aluminum Body with Plastic Covers Technical Substrate | Excellent (No Effect) | Resistant | Series R6000HF | -40.0°C to 90.0°C | Full Specs |
| LOTO-74 Perma-Mount Ball Valve Lockout Technical Substrate | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 90.0°C | Full Specs |
| LOTO-75 Safelex Adjustable Cable Lockout Device ABS and polycarbonate plastics; Stainless steel springs and locking cleats | Excellent (No Effect) | 25°C | Series R6000HF | Standard Industrial | Full Specs |
| LOTO-76 LOTO-76 Technical Substrate | Excellent (No Effect) | 25°C | Series R6000HF | -40.0°C to 100.0°C | Full Specs |
| LOTO-77 Compact Cable Padlocks Polyamide Nylon 66, flexible multi-stranded steel cable shackle with protective vinyl coating | Excellent (No Effect) | Tested | Series R6000HF | -20.0°C to 120.0°C | Full Specs |
| LOTO-78 Gate Valve Cover Polycarbonate | Excellent (No Effect) | 25°C | Series R6000HF | -40.0°C to 115.0°C | Full Specs |
| LOTO-79 Ultra-Compact Group Lock Box Polycarbonate ABS, Polycarbonate, Glass Filled Nylon | Excellent (No Effect) | Tested | Series R6000HF | Standard Industrial | Full Specs |
| LOTO-8 Safety Padlock Polyamide Nylon 66 (Lock Body), Steel (Shackle) | Excellent (No Effect) | 15 – 30°C | Series R6000HF | -20.0°C to 120.0°C | Full Specs |
| LOTO-81 Gate Valve Lockout Covers Acrylonitrile butadiene styrene (ABS) | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 100.0°C | Full Specs |
| LOTO-82 Taglock, Cleat and Body - Polypropylene Polypropylene, Glass-filled Nylon, Stainless Steel | Excellent (No Effect) | 25°C | Series R6000HF | -40.0°C to 115.0°C | Full Specs |
| LOTO-83 Taglock Polypropylene and impact modified nylon | Excellent (No Effect) | 25°C | Series R6000HF | Standard Industrial | Full Specs |
| LOTO-84 Oversized 480/600V frame lockout polypropylene and glass filled, impact modified nylon | Excellent (No Effect) | 25°C | Series R6000HF | -20.0°C to 120.0°C | Full Specs |
| LOTO-85 Design Glass-filled Nylon, Stainless Steel | Excellent (No Effect) | 25°C | Series R6000HF | -20.0°C to 120.0°C | Full Specs |
| LOTO-86 Design Glass filled Nylon | Excellent (No Effect) | Tested | Series R6000HF | -20.0°C to 120.0°C | Full Specs |
| LOTO-87 LOTO-87 Glass filled Nylon | Excellent (No Effect) | 25 | Series R6000HF | -20.0°C to 120.0°C | Full Specs |
| LOTO-88 Safety Lock & Tag Carrier Technical Substrate | Excellent (No Effect) | Tested | Series R6000HF | -20.0°C to 120.0°C | Full Specs |
| LOTO-9 Compact Safety Padlocks Technical Substrate | Excellent (No Effect) | Tested | Series R6000HF | -20.0°C to 120.0°C | Full Specs |
| LOTO-90 Pipe Blind Lockout Devices Technical Substrate | Excellent (No Effect) | 25°C | Series R6000HF | -40.0°C to 90.0°C | Full Specs |
| LOTO-91 Fuse Lockout - USSC2 Modular ABS | Excellent (No Effect) | Tested | Series R6000HF | -20.0°C to 120.0°C | Full Specs |
| LOTO-92 Terminal Block Lockout ABS | Excellent (No Effect) | Tested | Series R6000HF | -20.0°C to 120.0°C | Full Specs |
| LOTO-93 Fuse Lockout - GE NEC ABS | Excellent (No Effect) | Tested | Series R6000HF | -20.0°C to 120.0°C | Full Specs |
| LOTO-94 Fuse Lockout - 9/16" Block ABS | Excellent (No Effect) | Tested | Series R6000HF | -20.0°C to 120.0°C | Full Specs |
| LOTO-95 CIRCUIT BREAKER LOCKOUT - ABB MS325 SERIES Glass filled nylon | Excellent (No Effect) | Tested | Series R6000HF | -20.0°C to 120.0°C | Full Specs |
| LOTO-96 Miniature Circuit Breaker Lockout - Universal Fit Glass Filled Nylon, Stainless Steel | Excellent (No Effect) | Tested | Series R6000HF | -20.0°C to 120.0°C | Full Specs |
| LOTO-97 SlimView Lock Box Technical Substrate | Excellent (No Effect) | 25°C | Series R6000HF | -40.0°C to 120.0°C | Full Specs |
| LOTO-98 Pendant Control Safety Covers {'Body': 'Nylon'}; {'Panels': 'ABS'}; {'Bottom Hinge': 'Polypropylene'}; {'Lock Hasp': 'Cold Rolled Steel'}; {'Rope': 'Polyester'} | Excellent (No Effect) | Tested | Series R6000HF | -40.0°C to 100.0°C | Full Specs |
| LOTO-99 SafeKey Aluminum Padlocks Aluminum lock body, Chrome-plated steel shackle | Excellent (No Effect) | Tested | Series R6000HF | -26.0°C to 150.0°C | Full Specs |
| B-321 BradySleeve Marker Heat shrinkable, high density polyolefin film | Good (Slight Effect) | Slight print fade | R5000 | -40.0°C to 200.0°C | Full Specs |
| B-338 HIGH TEMPERATURE CABLE MARKER Polyvinylidene fluoride | Good (Slight Effect) | Slight smear or print removal, detectable but minimal smear | Series R6000HF | -55.0°C to 200.0°C | Full Specs |
| B-361B Clear Polyester Film Tape Clear polyester — clear film with matte white printable zone coated ink, permanent acrylic adhesive, used in a self-laminating format | Good (Slight Effect) | Slight unwrap | Series R6000HF | -70.0°C to 130°C | Full Specs |
| B-413 BRADYBONDZ™ B -413 Technical Substrate | Good (Slight Effect) | Slight adhesive ooze | Series R6000HF | Standard Industrial | Full Specs |
| B-422 B-422 THERMAL TRANSFER PRINTABLE GLOSSY WHITE POLYESTER LABEL STOCK White polyester | Good (Slight Effect) | Slight adhesive ooze | R4400 | -40.0°C to 100.0°C | Full Specs |
| B-423 BradyBondz(TM) Thermal Transfer Printable Glossy White Polyester Label Stock White polyester with a glossy white finish and a permanent acrylic adhesive, printed by thermal transfer | Good (Slight Effect) | Slight adhesive ooze | R4400 | -70.0°C to 110.0°C | Full Specs |
| B-423Y BradyBondz(TM) Thermal Transfer Printable Glossy Yellow Polyester Label Stock Polyester with a glossy yellow finish and a permanent acrylic adhesive, printed by thermal transfer | Good (Slight Effect) | Slight adhesive ooze | R6000 Halogen Free | -70.0°C to 110.0°C | Full Specs |
| B-430 BRADYBONDZ™ B -430 THERMAL TRANSFER PRINTABLE GLOSSY CLEAR POLYESTER LABEL STOCK Clear polyester | Good (Slight Effect) | Slight adhesive ooze | R4400 | 70.0°C to 100.0°C | Full Specs |
| B-437 Thermal Transfer Printable Label Stock Topcoated polyvinylfluoride | Good (Slight Effect) | Slight adhesive ooze | R4300 | -70.0°C to 135.0°C | Full Specs |
| B-459 B -459 THERMAL TRANSFER PRINTABLE MATTE WHITE POLYESTER LABEL STOCK White Polyester | Good (Slight Effect) | Slight yellowing, slight print removal after rub | R4400 | -40.0°C to 180.0°C | Full Specs |
| B-480A BRADYBONDZ™ B-480A THERMAL TRANSFER PRINTABLE LIGHT GRAY POLYESTER LABEL STOCK WITH RUBBER BASED ADHESIVE Top coated polyester | Good (Slight Effect) | Slight adhesive ooze | Series R6000HF | Standard Industrial | Full Specs |
| B-483A Thermal Transfer Printable Label Stock White polyester, glossy finish, permanent rubber based adhesive | Good (Slight Effect) | No visible effect | R4400 | -40°C to 120°C | Full Specs |
| B-502 B-502 POLYMER COATED CLOTH TAPE Polymer Coated Cloth | Good (Slight Effect) | Slight unwrap | R5000 | -40.0°C to 80.0°C | Full Specs |
| B-605 B-605 OVERLAMINATED WIRE MARKER White Polyvinylfluoride overlaminated with clear polyester film | Good (Slight Effect) | Slight adhesive ooze and unwrap, Slight adhesive ooze | Series R6000HF | -40.0°C to 120.0°C | Full Specs |
| B-637 Thermal Transfer Printable Label Stock Topcoated polyvinylfluoride | Good (Slight Effect) | Slight adhesive ooze, No visible effect without rub, slight print removal with rub | Series R6000HF | Standard Industrial | Full Specs |
| B-7304 B-7304 304 Stainless Steel | Good (Slight Effect) | slight rust but legible | Series R6000HF | Standard Industrial | Full Specs |
| B-7520 B-7520 Technical Substrate | Good (Slight Effect) | Slight edge lifting | Series R6000HF | -40.0°C to 140.0°C | Full Specs |
| B-388 B-388 STANDARD TEMPERATURE CABLE MARKER PolyolefinAvailable Colors:White, yellow APPLICATIONS:B-388 cable markers are designed as a high performance wire bundle and cable identification tag. This standardtemperature cable marker is meant for areas with continuous operating temperature up to 135°C. RECOMMENDED RIBBONBrady R6600 series black ribbon | Moderate | Moderate smear or print removal (print still legible) | Series R6000HF | -55.0°C to 135.0°C | Full Specs |
| B-417 Thermal Transfer Printable Translucent Vinyl Tape Translucent vinyl, provided in a self-laminated format with a white printable zone and a translucent overlaminating area, with a permanent acrylic adhesive | Moderate | Moderate unwrap | R4300 | -70.0°C to 70.0°C | Full Specs |
| B-427 Thermal Transfer Printable Translucent Vinyl Tape Translucent vinyl, provided in a self-laminated format with a white printable zone and a translucent overlaminating area, with a permanent acrylic adhesive, printed by thermal transfer | Moderate | Moderate unwrap | R4300 | -70.0°C to 70.0°C | Full Specs |
| B-498 Thermal Transfer Printable, Repositionable Coated Vinyl Cloth Label Stock Coated Vinyl Cloth | Moderate | Moderate unwrap, some adhesive ooze | R4300 | -40.0°C to 80°C | Full Specs |
| B-500 Polymer Coated Cloth Tape Polymer coated cloth with a printable topcoat and a rubber based pressure sensitive adhesive | Moderate | Moderate unwrap | Series R6000HF | -40°C to 80°C | Full Specs |
| B-7646 Diesel Resistant Sleeve Irradiated polyolefin diesel resistant heat-shrinkable tubing (3:1 shrink ratio) | Moderate | 3 (moderate fading or print removal) | Series R6000HF | -55.0°C to 135.0°C | Full Specs |
| B-312 Power Systems Grade PermaSleeve Marker Irradiated polyolefin heat shrink tubing (3:1 shrink ratio) | Moderate | No visible effect | R4300 | -30.0°C to 125.0°C | Full Specs |
| B-342 PermaSleeve Marker Irradiated polyolefin heat shrink tubing (3:1 shrink ratio) | Moderate | No visible effect | R4300 | -55.0°C to 135.0°C | Full Specs |
| B-472 Matte Topcoated Polyimide Wirewrap Label Stock Topcoated 1 mil polyimide | Moderate | No visible effect | R4300 | 100.0°C to 160.0°C | Full Specs |
Frequently Asked Questions: Diesel Fuel & Unleaded Gasoline Resistance
Q: Why does standard vinyl (like B-595) soften or wrinkle when exposed to Diesel Fuel & Unleaded Gasoline?
Vinyl (PVC) polymers contain plasticizers that make the film pliable. Aggressive organic solvents like Diesel Fuel & Unleaded Gasoline extract plasticizers from the vinyl matrix, causing the film to swell, wrinkle, and soften the underlying acrylic adhesive. For heavy solvent contact, polyester (B-423) or polyimide (B-652) are recommended.
Q: What is the difference between an immersion rating and a wipe-down rub test?
A wipe-down test simulates routine machine cleaning with a saturated rag for 10–20 rubs. An immersion test submerges the label directly into Diesel Fuel & Unleaded Gasoline for 5 cycles of 10 minutes. Many materials survive wipe-downs without degradation, but continuous total immersion requires specialized crosslinked resin ribbons and chemical-resistant face stocks.